Pontiac Grand Prix Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(391)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(391)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Pontiac Grand Prix Brake Master Cylinder Replacement is $224 with $84 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Pontiac Grand PrixV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$506.42Shop/Dealer Price$573.27 - $760.05
1992 Pontiac Grand PrixV6-3.4LService typeBrake Master Cylinder ReplacementEstimate$491.10Shop/Dealer Price$554.95 - $739.48
2005 Pontiac Grand PrixV8-5.3LService typeBrake Master Cylinder ReplacementEstimate$574.54Shop/Dealer Price$662.76 - $920.71
2001 Pontiac Grand PrixV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$474.31Shop/Dealer Price$547.85 - $763.05
2004 Pontiac Grand PrixV6-3.8LService typeBrake Master Cylinder ReplacementEstimate$574.54Shop/Dealer Price$665.11 - $924.83
1996 Pontiac Grand PrixV6-3.4LService typeBrake Master Cylinder ReplacementEstimate$534.90Shop/Dealer Price$599.63 - $784.81
1991 Pontiac Grand PrixV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$388.91Shop/Dealer Price$451.51 - $635.11
2003 Pontiac Grand PrixV6-3.8LService typeBrake Master Cylinder ReplacementEstimate$547.37Shop/Dealer Price$639.18 - $909.17
Show example Pontiac Grand Prix Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(391)

Rating Summary
363
17
2
0
9
363
17
2
0
9

PETE

20 years of experience
26 reviews
PETE
20 years of experience
Grand Prix 2008 - Power steering fluid is leaking - Claymont, DE
Helped me out alot

Salvador

19 years of experience
14 reviews
Salvador
19 years of experience
Grand Prix 1999 - Crankshaft Harmonic Balancer - Hagerstown, MD
Second job,of Salvador,and again outstanding as always,I can say with ease,I've found my Mechanic.He can do all my repairs,anytime,Thanks Salvador.

Daniel

8 years of experience
37 reviews
Daniel
8 years of experience
Grand Prix 2003 - Brakes, Steering and Suspension Inspection - Las Vegas, NV
Did a great job solved the issue!

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Grand Prix 2002 - Ignition Coil - Indianapolis, IN
Michael is the best. Always timely and when he is running late he is in contact which is extremely considerate. Takes pride in his work and always makes sure it is done correctly. I specifically request him and trust him to work on our cars.

Excellent Rating

(391)

Rating Summary
363
17
2
0
9
363
17
2
0
9
Number of Pontiac Grand Prix services completed
4301+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0746 OBD-II Trouble Code: Pressure Control Solenoid Performance or Stuck Off
P0746 code means the PCM has detected an irregularity in the electronic pressure control solenoid circuit often due too blockages or low fuel levels.
P0139 OBD-II Trouble Code: O2 Sensor Circuit Slow Response (Bank 1, Sensor 2)
P0139 code definition O2 Sensor Circuit Slow Response (Bank 1, Sensor 2) What the P0139 code means P0139 is the OBD-II generic...
How to Get a Maine Driver's Permit
In In order to begin driving on the roads in Maine, anyone under the age of 21 must go through the graduated driver’s license permit, which begins with a learner’s permit. This driver’s permit allows those who are at least...

How do I release the steering wheel lock with the key?

When your car is turned off, the steering wheel will sometimes lock as a safety precaution. During this time, the steering wheel will barely move, and the car cannot be turned on. To release the steering wheel lock, insert the...

1997 Explorer shaking at 55 mph and up

Get in touch with a good mechanic and get the tires checked. The balance on the tires is checked first. Bad balance would often do that. If you don't see anything loose when you jack it up, pull the tires...

Blower motor resistor and transistor.

Your car is not equipped with a transistor for the blower motor. Your car has a blower resistor that controls the speed of the blower motor with the changes to the blower switch. The burning smell you are getting may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com