Pontiac Bonneville Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(69)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(69)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Bonneville Power Steering Pressure Hose Replacement is $187 with $47 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Pontiac BonnevilleV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$330.70Shop/Dealer Price$371.20 - $482.96
2004 Pontiac BonnevilleV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$418.29Shop/Dealer Price$477.80 - $650.96
1992 Pontiac BonnevilleV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.42 - $618.96
1995 Pontiac BonnevilleV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.42 - $618.96
1995 Pontiac BonnevilleV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$328.31Shop/Dealer Price$377.22 - $516.46
1998 Pontiac BonnevilleV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$290.69Shop/Dealer Price$328.86 - $438.89
2001 Pontiac BonnevilleV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$310.49Shop/Dealer Price$353.49 - $478.27
1993 Pontiac BonnevilleV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.42 - $618.96
Show example Pontiac Bonneville Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(69)

Rating Summary
63
5
1
0
0
63
5
1
0
0

Claud

6 years of experience
341 reviews
Claud
6 years of experience
Bonneville 2000 - Spark Plugs - Detroit, MI
Claude was very informative, known and efficient!

Gregory

208 years of experience
385 reviews
Gregory
208 years of experience
Bonneville 2001 - Starter - Littleton, CO
Good man, great mechanic

Joseph

0 years of experience
646 reviews
Joseph
0 years of experience
Bonneville 1999 - Heater Blower Motor - Taylorsville, UT
Joseph is always prompt, and knowledgeable. Does a good inspection and get's to work ... fixes the issues quickly and very friendly.

Joe

0 years of experience
528 reviews
Joe
0 years of experience
Bonneville 2005 - Power Steering Pressure Hose - Fairview, TN
Joe was a little late but he texted me before our appointment to let me know. Once he arrived he was very professional and repaired my vehicle in an expert manner. He had all of the tools and parts needed to complete the job with him and there were no surprises.

Excellent Rating

(69)

Rating Summary
63
5
1
0
0
63
5
1
0
0
Number of Pontiac Bonneville services completed
759+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Michigan
Michigan is one of those states fortunate enough to play host to a variety of beautiful scenes, whether it be on the beaches of one of the Great Lakes or alongside fertile farmlands. Travelers can basically set off in any...
P0588 OBD-II Trouble Code: Cruise Control Vent Control Circuit High
P0588 means an issue with the cruise control vent control circuit, caused by a faulty vent control solenoid or damage cruise control circuitry.
How to Replace an Exhaust Clamp
An exhaust pipe is supported by exhaust clamps within a vehicle. A bad clamp can lead to exhaust leaks that can turn hazardous if not addressed.

Car makes noise over 30 mph

Several components can cause strange noises during vehicle operation. The sluggish symptom points to a lack of power, which can come from a fault in the engine or transmission as the engine makes the power and the transmission puts that...

My car slips on icy roads

All-wheel drive is the best for driving in poor weather conditions (https://www.yourmechanic.com/article/safe-winter-driving-techniques-by-kevin-woo). But, if you hit black ice, it really doesn't matter what set up you have, you're still going to loose traction. In theory, a vehicle with a wide...

second opinion) Customer: I need a security code for my radioJA: Okay, I'll connect you to the Mechanic to go over that information regarding your car. Before I do, is there anything else you want him to know?Customer: No that's it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com