Pontiac 6000 Camshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Camshaft Position Sensor Replacement Service

How much does a Camshaft Position Sensor Replacement cost?

On average, the cost for a Pontiac 6000 Camshaft Position Sensor Replacement is $230 with $90 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Pontiac 6000L4-2.5LService typeCamshaft Position Sensor ReplacementEstimate$335.48Shop/Dealer Price$384.20 - $522.26
1991 Pontiac 6000V6-3.1LService typeCamshaft Position Sensor ReplacementEstimate$326.39Shop/Dealer Price$373.32 - $510.00
1990 Pontiac 6000L4-2.5LService typeCamshaft Position Sensor ReplacementEstimate$326.47Shop/Dealer Price$373.45 - $510.20
1990 Pontiac 6000V6-3.1LService typeCamshaft Position Sensor ReplacementEstimate$326.39Shop/Dealer Price$373.35 - $510.04
Show example Pontiac 6000 Camshaft Position Sensor Replacement prices

What is the Camshaft Position Sensor all about?

The camshaft position sensor monitors the position of the camshaft and reports that data to the car’s onboard computer system. This computer system works with sensors and other devices to keep the engine running. With data from the camshaft position sensor (CPS), the fuel injectors know when to fire.

When the sensor malfunctions, the computer does not know when to fire the injectors and may not fire them at all. The faulty readouts may also throw off spark timing, which will affect the car’s fuel economy. This sensor is used in conjunction with the crankshaft position sensor to control ignition timing. It is common for heat and oil leaks to cause this sensor to fail, due to where the sensor is located.

Keep in mind:

  • Damage to the camshaft position sensor is often caused by oil leaks; if this is the case, you may need another part of your car replaced or repaired.
  • When the camshaft position sensor is replaced, the alignment of the timing belt should be monitored so that no fluids leak onto the position sensor mounting area.
  • Some camshaft position sensors will need to have their software updated when they are installed.
  • Timing belts, mass air flow sensors, and crankshaft position sensors can all trigger the trouble code for the camshaft position sensor.

How it's done:

  • Scan test computer for trouble codes.
  • Pinpoint tests as per flow charts.
  • Remove and replace Crankshaft Position Sensor.
  • Clear trouble codes.
  • Check for proper operation and test drive car.

Our recommendation:

The camshaft position sensor isn’t checked in most regular services, but your vehicle has warning signs for when the sensor begins to fail. Because it sends information to the camshaft, when the sensor begins to fail your engine will begin to have trouble. Your engine may have a hard time turning on, staying on, idling, or running smoothly. Your Check Engine warning light should illuminate as well.

What common symptoms indicate you may need to replace the Camshaft Position Sensor?

  • Car stalls or does not start.
  • Car struggles to accelerate (does not maintain speed).
  • Check Engine light is on.
  • Car misfires.
  • Car stumbles or sputters on startup.
  • Car runs poorly or runs rough.

How important is this service?

The camshaft position sensor provides valuable information about the camshaft position to the computer management system. The computer system uses the information from the position sensor to determine when to inject more fuel. Without the sensor’s information, the computer won’t inject fuel properly, and your vehicle will stall or sputter.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(6)

Rating Summary
4
0
0
1
1
4
0
0
1
1

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Pontiac 6000 L4-2.5L - Drive Belt Tensioner - Gastonia, North Carolina
Went well.but had to call back because of a problem with tension pulleuy

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Pontiac 6000 L4-2.5L - Car is not starting Inspection - Tucson, Arizona
very helpful and taught me a lot about my car

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Pontiac 6000 L4-2.5L - Drive Belt Tensioner - Gastonia, North Carolina
Brikkwas on time .did a great job.highly recommend him

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Pontiac Grand Prix V6-3.8L Turbo - Camshaft Position Sensor Replacement - Houston, Texas
He was great

Excellent Rating

(6)

Rating Summary
4
0
0
1
1
4
0
0
1
1
Number of Pontiac Camshaft Position Sensor Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Throttle Body Temp Sensor
Common signs include poor engine performance, stalling, and broken electrical connections.
3 Bad Transmission Speed Sensor Symptoms
Discover symptoms of a bad transmission speed sensor to prevent unexpected breakdowns and keep your vehicle's performance in check with YourMechanic.
How Long Does a Low Water Sensor Last?
The The heat that is produced by your engine can be quite harmful if not cooled down. There are a variety of systems in your car that are designed to make sure that the internal temperature of your engine stays...

Misfire bank one 4x4 light will not go off

Is there a severe lack of power along with the misfires? A clogged catalytic converter can cause misfires and cause the check engine light to flash. These trucks are sensitive to the type of air filter used and using the...

Brake pad sensor on - 2014 Audi Q7

Hello. If the brake pad light came on, then that does typically mean that the vehicle needs brakes. It is possible that the sensor itself just shorted out, but I rarely see that on this vehicle. If the brakes are...

Check engine light comes on while driving. My vehicle started jerking while driving. I was told it may be the camshaft sensor.

Hi there. When your car is jerking around, this means that the engine is having a misfire and causing the engine to stumble making the vehicle seem to jerk around. Check the camshaft position sensor for any damage and if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com