Plymouth Voyager Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Plymouth Voyager Fuel Injector Replacement is $150 with $10 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Plymouth VoyagerV6-3.3LService typeFuel Injector ReplacementEstimate$1334.62Shop/Dealer Price$1629.61 - $2505.67
1997 Plymouth VoyagerV6-3.8LService typeFuel Injector ReplacementEstimate$3070.24Shop/Dealer Price$3768.47 - $5854.92
1996 Plymouth VoyagerL4-2.4LService typeFuel Injector ReplacementEstimate$1757.79Shop/Dealer Price$2162.60 - $3372.84
1998 Plymouth VoyagerV6-3.3LService typeFuel Injector ReplacementEstimate$1153.08Shop/Dealer Price$1372.07 - $2020.68
1995 Plymouth VoyagerV6-3.3LService typeFuel Injector ReplacementEstimate$780.11Shop/Dealer Price$935.34 - $1392.02
1991 Plymouth VoyagerV6-3.3LService typeFuel Injector ReplacementEstimate$1612.71Shop/Dealer Price$1977.94 - $3068.68
1994 Plymouth VoyagerV6-3.0LService typeFuel Injector ReplacementEstimate$2000.94Shop/Dealer Price$2442.32 - $3759.28
1992 Plymouth VoyagerL4-2.5LService typeFuel Injector ReplacementEstimate$1864.27Shop/Dealer Price$2295.70 - $3585.80
Show example Plymouth Voyager Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(41)

Rating Summary
36
3
0
0
2
36
3
0
0
2

Lee

20 years of experience
113 reviews
Lee
20 years of experience
Plymouth Voyager L4-2.4L - Brake Pads Replacement (Front) - Richmond, Virginia
Knowledgeable, astute and exemplary service.

Angelo

33 years of experience
76 reviews
Angelo
33 years of experience
Plymouth Voyager V6-3.0L - Car is not starting - Carrollton, Texas
Very informative, great customer service, explained everything to where I understood, knowledgeable, definitely a good mechanic. All around nice guy. Highly recommend Angelo to my family, friends & co workers.

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Plymouth Voyager V6-3.0L - AC is not working - San Jose, California
Whitney arrived within the time window, performed the evaluation and provided options on repair. He is knowledgeable and considerate.

Marco

15 years of experience
36 reviews
Marco
15 years of experience
Plymouth Voyager V6-3.0L - Oil Change - Escondido, California
Marco was professional, friendly and went above beyond. Great customer service.

Excellent Rating

(41)

Rating Summary
36
3
0
0
2
36
3
0
0
2
Number of Plymouth Voyager services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

P2089 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank1
P2089 P2089 code definition A Camshaft Position Actuator Control Circuit High Bank1 What the P2089 code means The P2089 code means that the A camshaft position actuator was found to have high voltage. The vehicle’s electronic control unit (ECU) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit)...
B1949 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Failure
B1949 means there is a failure in the circuit for the climate control water temperature sensor, likely due to an electrical problem somewhere.
How to Renew Your Car Registration in Maryland
In In order to keep the roads of Maryland safe and drivable, there will have to be taxes that need to paid by citizens. Among the most common taxes that a person will have to pay is to get their...

The etc light came on

Hi Daniel. Thanks for submitting your question tonight. The ETC light is an indication of a fault with the Electronic Throttle Control. This system is responsible for relaying your physical input when applying pressure to the throttle pedal and sending...

Does my 2010 Chevrolet Cobalt have 2 timing chains?

Hi Tiffany. Thanks for contacting us today. I think your mechanic is simply confused with the nomenclature, but there are (2) chains that comprise the timing system on a 2.2 Ecotec engine. The first is the timing chain, which is...

This morning i went and started my 2006 Nissan Altima 3.5 sl, it was obviously very cold out and I wanted to defrost the windows and warm up the car before going to work..all seemed well. Well i remembered i hadn't turned on the the rear defrost, so i went back outside. Anyways, while I was sitting in the driver's seat ...I heard a loud screeching noise that kept repeating, so I turned the car off..but it wouldn't turn off. Even after i had removed the key. Then popped the hood and there was some smoke, and the smell of something burning/melting. The car sounded like it was trying to crank even though it was still on and running. It finally shut off, and i have unhooked the battery ...as I qas clueless as to what else to do in that moment...any idea on what this could be..or is my car just saying its done with me and wants to break up?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com