Oldsmobile Regency Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(589)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(589)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Oldsmobile Regency Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Oldsmobile RegencyV6-3.8LService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Oldsmobile RegencyV6-3.8LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Oldsmobile Regency Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(589)

Rating Summary
537
27
6
6
13
537
27
6
6
13

Natnael

8 years of experience
5 reviews
Natnael
8 years of experience
Oldsmobile Regency V6-3.8L - Door Mirror Replacement (Passenger Side) - Potomac, Maryland
He installed a new outside, electric remote control mirror on my mother's car. On time; professional and cordial. I could not have expected more. Thanks.

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Oldsmobile Cutlass Supreme V6-3.1L - Car is hard to start Inspection - Spring, Texas
Very knowledgeable

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Oldsmobile 98 V6-3.8L - Oil Pressure Light is on - Houston, Texas
The mobile mechanic came. I must say I am impressed! He found my house. He and I started talking. He said he owned two Ninety Eights previously. He was there to look at my Oldsmobile Ninety Eight. He had two Oldsmobile Ninety Eight Touring Sedans. The ones he owned were from the 1987-1990 era. He was describing the floor shifters and they had and how much he liked Ninety Eights, Touring Sedans, and the Oldsmobile Eighty Eight LSS too. He talked about how a family member owned one and how he was fixing his. He talked in detail about the Touring Sedan and the things he loved. He asked me how long had I owned my Ninety Eight. I told him 2003. He told me how he become a mechanic and went to school for it and more. He got into the Ninety Eight and it would not start. He got out and disconnected the battery and rubbed the negative and positive battery terminals together. He reconnected them and the Ninety Eight started! The instrumentation then told him exactly what it was. There is a sensor at the bottom of the oil pan. He said by doing what he did with the terminals, it cleared the computer and reset it. We went underneath the car and he showed me the sensor. He said which one did you replace? I told him. He said you were on the right path. You know what you are doing. You need to replace this sensor and not the one you did. You can get the sensor and replace it because it is clear you know what you are doing and on the right path. He said you also need to replace your valve cover gaskets. They are leaking. I told him I will request him to come back and do that. I am not doing that even thought I can.

Tyrone

19 years of experience
105 reviews
Tyrone
19 years of experience
Oldsmobile Achieva L4-2.4L - Oil Change - Houston, Texas
It was a highly enjoysble experience with a young man who is personable, a gigted mechanic, and a true professional!!!

Excellent Rating

(589)

Rating Summary
537
27
6
6
13
537
27
6
6
13
Number of Oldsmobile services completed
6479+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

What Is the Difference Between a Water-Cooled Engine and an Air-Cooled Engine?
There There are a few main differences between a water-cooled and air-cooled engine. Air-cooled engines utilize an engine cylinder design that incorporates cooling fins all the way around the cylinder and on top of the piston cylinder head. These fins...
Symptoms of a Bad or Failing Air Fuel Ratio Sensor
If you notice a decrease in fuel efficiency or engine power output, as well as a rough idle, you may have to replace any air-fuel ratio sensors.
What is Surge Pricing?
Surge pricing applies to rideshare services that increase costs in busy areas to mediate supply and demand of rides. Luckily, it can be avoided.

The car pulls to the right upon deceleration

Hi. It should be a fairly simple cause. I suggest checking your tires for uneven wear because that is the number one cause of pulling next to an alignment being out up specifications. So have the alignment checked (https://www.yourmechanic.com/article/how-to-know-if-you-need-a-wheel-alignment-by-robert-tomashek) as...

Continuous Clunking and thumping while driving.

Good job on the description of the noise. What you are describing is the noise that a wheel bearing makes when it is worn out. The noise will change pitch when steering left and right. The bearings for your PT...

Delayed engagement from P to D when cold, but not in reverse

Many newer automatic transmissions have temperature-sensors in them that, on a stone-cold start, restrict normal shift to only the lower (or non-overdrive gears) until the engine coolant and transmission fluid reach a certain level which in many engines, is around...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com