Oldsmobile Cutlass Ciera Car will not turn over Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(65)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(65)

Car will not turn over Inspection Service

How much does a Car will not turn over Inspection cost?

On average, the cost for a Oldsmobile Cutlass Ciera Car will not turn over Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Oldsmobile Cutlass CieraV6-3.8LService typeCar will not turn over InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Oldsmobile Cutlass CieraV6-2.8LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Oldsmobile Cutlass CieraV6-3.3LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Oldsmobile Cutlass CieraL4-2.5LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1984 Oldsmobile Cutlass CieraL4-2.5LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 Oldsmobile Cutlass CieraL4-2.5LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Oldsmobile Cutlass CieraV6-3.3LService typeCar will not turn over InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1982 Oldsmobile Cutlass CieraV6-3.0LService typeCar will not turn over InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Cutlass Ciera Car will not turn over Inspection prices

Generally, when you turn the key to “run” position, the engine cranks (turns over), and starts running. You’re then free to put the transmission in gear and drive. If your car won’t turn over, it means you’re stranded wherever you were when it broke down. There are several potential causes for this problem as well.

How this system works:

Any situation in which your car won’t turn over involves your ignition system. There’s a problem somewhere in there, but quite a few components play a significant role, so there will have to be some narrowing down of the options to determine what’s causing the problem.

When you turn the key in your ignition, several things happen. First, the battery sends voltage to the starter, the spark plugs and the main relay. The starter is what’s responsible for turning the engine over initially. The spark plugs create the spark needed to ignite gasoline vapor. The main relay turns on the fuel pump, which sends gasoline from the tank to the engine.

If there’s a problem with any one of these components, then your car may not turn over. Depending on the problem, you may hear nothing but a clicking noise when you turn the key, or you may hear the engine trying to turn over, but not quite managing it.

Common reasons for this to happen:

  • Dead Battery: The single most common reason for a no start condition is a dead battery. If the battery is dead, then no voltage can be sent to the other components, including the starter. The battery may have a bad cell, or there could be a parasitic drain that’s causing the issue.

  • Failed Starter: While rarer than a dead battery, starters can and do fail. They’re considered a high-wear component, and you’ll eventually need to replace yours. The most common issue with starters is the solenoid, but it can also be a problem with the Bendix or even the wiring.

  • Bad Alternator: If the alternator isn’t charging the battery, then supplying the electricity needed to run your engine and accessories will drain the battery’s charge. The engine might stall out while you’re driving, or it might not crank the next time you get in.

  • Failed Main Relay: It’s entirely possible that your battery, starter and alternator are fine, and the problem is actually a failed main relay. If this happens, the fuel pump will not kick on when you turn the ignition to “run”.

What to expect:

One of our highly trained mechanics will come to your home or office to inspect your ignition system, including the battery, starter, alternator, main relay and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the battery, and then move on to testing other components in the system, including the alternator, the starter and the main relay. It may be necessary to charge or replace the battery before further diagnostics can be completed.

How important is this service?

If your car won’t turn over, you’re dead in the water. It’s a tough place to be, particularly if you weren’t at home when the problem happened. The most important defense against this condition is to have your charging system regularly inspected. This will test the battery, starter and alternator, and alert you to potential problems before they become serious issues. One of our professional mechanics can inspect your car and repair your no start problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(65)

Rating Summary
62
2
0
0
1
62
2
0
0
1

Clarissa

27 years of experience
239 reviews
Clarissa
27 years of experience
Oldsmobile Cutlass Ciera V6-3.1L - Idle Control Valve - Wayne, Pennsylvania
Clarissa showed up a little before the appointment time, and immediately went to work on my car. I am very grateful for her honest assessment of what needs to be replaced on my car and when it needs to be replaced. I have full confidence in Clarissa’s abilities and knowledge of my car. I am grateful to Clarissa for working so cheerfully and efficiently in rainy weather. I will continue to have Clarissa working on my car!!! She is definitely an asset to your company!!!

David

16 years of experience
636 reviews
David
16 years of experience
Oldsmobile Cutlass Ciera V6-3.3L - Idle Control Valve - Sacramento, California
Quick repair..good thing David was able to replace the part so my car stopped stalling at random times..will book again

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Oldsmobile Cutlass Ciera V6-3.3L - Valve Cover Gasket Replacement - Sacramento, California
Quick repair..thanks again!

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Oldsmobile Cutlass Ciera V6-3.1L - Car is not starting - Fremont, California
the event went very well. Nice attitude, arrived on time did not wastseany time getting started.

Excellent Rating

(65)

Rating Summary
62
2
0
0
1
62
2
0
0
1
Number of Oldsmobile Cutlass Ciera services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Throttle Position Sensor Last?
The The throttle body in your car is a rather involved system that is part of its air intake system. The air intake system is responsible for controlling the amount of air that you are letting into the engine. In...
How to Get Ice Off Your Windshield
Windshields need de-icying when ice accumulates in winter. Ice is removed by scraping with a credit card, spraying de-icer, or using warm water.
How to Install Mud Flaps
Mud flaps provide a splash guard for the water that sprays against car tires. Mud guards can be drilled into the car or installed with screws.

My car is making a chirping noise when I accelerate and turn right. It stops when I brake.

At 30,000 miles you likely need a brake pad replacement. Your brake pads come with indicators attached (metal tabs that squeak when they are worn down). I would recommend a full brake inspection and go from there.

The is the sound and feel of a "clunk" when putting the car into the drive gear and when coming to a complete stop.

The pop or clunk is the transmission shifting into first gear. If you look at this complaint on the Jeep Forums you will find many different opinions of what it may be and what fixed their vehicle. The first thing...

Hey Larry it's Carl from last night. Just got back on this and did a bunch of diagnostics z(had to work this morning) FYI its the P420 code on a 2010 Equinox 3.4l 4-cyl 1. Bank 1 sensor varied from .2v to.9 v at idle & 2000rpm (fuel trim varied from -3%-8%to16% 2. Bank 2 sensor remained consistent .69v to.75v at idle and 2000rpm 3. Backpressure at up & Down stream O2 sensors are at 1.25-1.5psi 4. Found small leak at muffler exit/tail pipe of the vehicle (see attached) It’s in the muffler seam at the hanger weld (cant believe that would throw the code)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com