Oldsmobile Cutlass Calais Steering Rack/Gearbox Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Steering Rack/Gearbox Replacement Service

How much does a Steering Rack/Gearbox Replacement cost?

On average, the cost for a Oldsmobile Cutlass Calais Steering Rack/Gearbox Replacement is $483 with $259 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example Oldsmobile Cutlass Calais Steering Rack/Gearbox Replacement prices

What is the Steering Rack/Gearbox all about?

A rack and pinion system uses several large components. This includes your main-shaft, universal joints, and an underlying intermediate shaft which immediately responds to all your steering wheel movements.

This rack and pinion system is designed to make your car’s steering easier to turn with the added help of a power assisted pump or motor. The typical car sold these days now weighs over 3000 pounds and larger vehicles like trucks and SUVs often weigh over 5000 pounds. The steering rack along with this power assist system are what allow you to easily move all that heavy mass between the steering wheel and your tires without so much as breaking a sweat.

Keep in mind:

The steering rack requires heavy and sometimes sophisticated equipment to operate properly. Many of the big and heavy parts that are underneath your vehicle, such as the shafts and universal joints, can gradually wear out over the course of time.

If you feel your steering is tight, chances are your rack is perfectly fine. It’s when your steering feels sloppy, or when you start seeing power steering fluid underneath your vehicle, that an inspection should be done. Also, keep in mind that damage to major suspension parts, such as your CV axles, ball joints, and tie rod ends, can make your steering feel loose and uneven.

This is why it’s a good idea to have your entire steering and suspension system inspected whenever you suspect that there is an issue with your steering.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The tires are removed and tie rods and steering gear disconnected
  • The steering rack and gear box is replaced
  • The system is filled with new fluid, tires reinstalled
  • The vehicle is lowered off of the jack stands

Our recommendation:

If your steering starts to feel clunky or uneven, get it inspected at the earliest possible opportunity. Even a minor issue, such as a cracked seal in between major components, can leak power steering fluid onto your steering rack. This can lead lead to the deterioration or even the complete failure of your steering rack. It’s worth your time to contact one of our top-rated mechanics so that the quickest and most reasonable solution can be pursued for your steering system.

What common symptoms indicate you may need to replace the Steering Rack/Gearbox?

  • Sloppy or uneven steering that takes varying levels of effort.
  • Power steering fluid leaks that are usually at the rear of the engine bay or underneath your car.
  • A hard ‘clunk’ noise when you go over large bumps coupled with a feel of being disconnected to the steering wheel.

How important is this service?

Steering is one of those aspects of driving that you never want to shortchange. Often times, a small issue can be due to little more than a leaking power steering hose or a malfunctioning power steering pump. These both tend to be far less expensive repairs than a steering rack.

However, if your steering rack is in need of replacement the consequences of ignoring it can be dire. The worst accidents tend to happen due to the loss of control on a vehicle and your steering rack is the one component that enables your steering to remain precise. If your steering is giving you trouble, it’s important to address it promptly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Adjust Ignition Timing - Spring, Texas
Came to do my timing, diagnosed bad harmonic balancer I totally agree with his assessment. Will be having new one installed.

Robert

43 years of experience
232 reviews
Robert
43 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Brake Pads Replacement (Front) - Spring, Texas
Got right down to business,did good job and went above and beyond.

Ronnaldo

12 years of experience
69 reviews
Ronnaldo
12 years of experience
Oldsmobile Cutlass Calais L4-2.3L - Serpentine/Drive Belt - McDonough, Georgia
He was great, professional and knowledgeable.

Ned

25 years of experience
52 reviews
Ned
25 years of experience
Oldsmobile Cutlass Calais V6-3.8L - Car is not starting - Scottsdale, Arizona
Ned is most thorough and professional;highly knowledgeable. He's a first rate automotive technician.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Oldsmobile Cutlass Calais services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P2784 OBD-II Trouble Code: Input/Turbine Speed Sensor A/B Correlation
P2784 means a signal from the turbine speed sensor was detected due to electrical issues, faulty sensors or solenoids or bad transmission fluid.
P0509 OBD-II Trouble Code: Idle Air Control System Circuit High
P0509 means that your vehicle’s PCM has picked up on an inconsistency regarding the RPM of the engine when it’s in idle due to leaks, or shortages.
How Long Does a Windshield Wiper Arm Last?
The The windshield of a car is a very important part. There are a variety of things that can happen to a windshield that can make it hard for the driver to use. Having a dirty windshield can be very...

2006 nissan quest when put into gear or driving there's a loud clunk

One common cause of such noise is a failed outer CV joint on the CV axle. If you peer behind each front wheel, underneath the vehicle, and use a very bright focused light to shine on the rubber boots that...

Check engine light flashing on 2000 ford taurus

If the Check Engine Light is flashing, (https://www.yourmechanic.com/article/the-check-engine-light-demystified) it means that continuing to drive your car could cause damage to the catalyst. You probably have a misfire and it is likely something that happened while you were changing your spark...

the last set were Toy. coils/ ? lean operation ?? what is that...the last coil failed days after it was driven.

It is very possible that the quality control of those particular parts may not be what it used to be. It just depends on how many times you've had to replace it. Sometimes Parts can last for years and other...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com