Oldsmobile Cutlass Calais Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Oldsmobile Cutlass Calais Power Steering Pump Replacement is $224 with $84 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Oldsmobile Cutlass CalaisV6-3.3LService typePower Steering Pump ReplacementEstimate$367.88Shop/Dealer Price$424.70 - $587.06
1991 Oldsmobile Cutlass CalaisL4-2.5LService typePower Steering Pump ReplacementEstimate$474.11Shop/Dealer Price$540.64 - $734.04
1990 Oldsmobile Cutlass CalaisV6-3.3LService typePower Steering Pump ReplacementEstimate$358.87Shop/Dealer Price$413.95 - $575.00
1990 Oldsmobile Cutlass CalaisL4-2.3LService typePower Steering Pump ReplacementEstimate$519.46Shop/Dealer Price$576.58 - $739.17
1991 Oldsmobile Cutlass CalaisL4-2.3LService typePower Steering Pump ReplacementEstimate$492.40Shop/Dealer Price$545.85 - $690.46
1990 Oldsmobile Cutlass CalaisL4-2.5LService typePower Steering Pump ReplacementEstimate$474.11Shop/Dealer Price$540.88 - $734.47
Show example Oldsmobile Cutlass Calais Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Ned

25 years of experience
52 reviews
Ned
25 years of experience
Oldsmobile Cutlass Calais V6-3.8L - Car is not starting - Scottsdale, Arizona
Ned is most thorough and professional;highly knowledgeable. He's a first rate automotive technician.

Ronnaldo

12 years of experience
69 reviews
Ronnaldo
12 years of experience
Oldsmobile Cutlass Calais L4-2.3L - Serpentine/Drive Belt - McDonough, Georgia
He was great, professional and knowledgeable.

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Adjust Ignition Timing - Spring, Texas
Came to do my timing, diagnosed bad harmonic balancer I totally agree with his assessment. Will be having new one installed.

Robert

43 years of experience
232 reviews
Robert
43 years of experience
Oldsmobile Cutlass Calais V8-5.0L - Brake Pads Replacement (Front) - Spring, Texas
Got right down to business,did good job and went above and beyond.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Oldsmobile Cutlass Calais services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volkswagen Touareg TDI
The The 2012 Volkswagen Touareg TDI brings diesel to the family in a big way. This crossover SUV delivers seamless performance in a vehicle that obviously designed for the open road rather than any trails or other types of off-road...
Symptoms of a Bad or Failing Thermostatic Vacuum Sensor
Common signs include the Check Engine Light coming on, poor engine performance, and an overheating engine.
A Buyer’s Guide to the 2012 Chevrolet Malibu Hybrid
The The 2012 Chevrolet Malibu ECO hybrid is an interesting car in the world of mid-size family sedans. Unlike other popular hybrids, it doesn’t have a full-sized electric motor that takes over when the car starts. Instead, it uses eAssist...

Check Engine light and camshaft position sensor code

Hi. If you have a camshaft position sensor code that is coming up, then that is why the Check Engine Light is coming off and on. Most of the time, this is caused by a sensor failure, but it can...

is it safe to drive my car when the electrical coupling assembly needs replaced

I am not sure too sure if you are talking about the higher voltage battery charge port for the hybrid battery or another component. But if it is I would have to see it to tell you if it was...

While highway driving, car stopped accelerating & became inoperative

This message indicates there is a problem in the anti-lock braking and/or electronic stability program system. If the problem is severe enough, the vehicle will go into limp mode, as you experienced. The root cause could be anything from a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com