Oldsmobile Custom Cruiser Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(584)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(584)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Oldsmobile Custom Cruiser Brake Drum Replacement is $341 with $170 for parts and $171 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1978 Oldsmobile Custom CruiserV8-6.6LService typeBrake Drum ReplacementEstimate$634.50Shop/Dealer Price$748.13 - $1035.02
1975 Oldsmobile Custom CruiserV8-6.6LService typeBrake Drum ReplacementEstimate$586.50Shop/Dealer Price$700.17 - $987.10
1977 Oldsmobile Custom CruiserV8-5.7LService typeBrake Drum ReplacementEstimate$863.00Shop/Dealer Price$1045.79 - $1540.09
1986 Oldsmobile Custom CruiserV8-5.0LService typeBrake Drum ReplacementEstimate$575.22Shop/Dealer Price$692.90 - $1003.20
1978 Oldsmobile Custom CruiserV8-5.7L DieselService typeBrake Drum ReplacementEstimate$586.50Shop/Dealer Price$700.21 - $987.16
1985 Oldsmobile Custom CruiserV8-5.7L DieselService typeBrake Drum ReplacementEstimate$528.36Shop/Dealer Price$634.36 - $909.55
1983 Oldsmobile Custom CruiserV8-5.0LService typeBrake Drum ReplacementEstimate$597.42Shop/Dealer Price$710.49 - $996.36
1978 Oldsmobile Custom CruiserV8-5.7LService typeBrake Drum ReplacementEstimate$875.00Shop/Dealer Price$1058.36 - $1553.08
Show example Oldsmobile Custom Cruiser Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(584)

Rating Summary
535
26
5
6
12
535
26
5
6
12

Dwaine

45 years of experience
39 reviews
Dwaine
45 years of experience
Oldsmobile Custom Cruiser V8-5.0L - Distributor Rotor and Cap - Saint Petersburg, Florida
outstanding service from Dwaine. I'm very pleased .

Mario

20 years of experience
110 reviews
Mario
20 years of experience
Oldsmobile Aurora V8-4.0L - Serpentine/Drive Belt - Cape Coral, Florida
He was incredible!! Showed up on time and fixed my car quickly. They are very reasonable and would recommend him to my friends and family. Thank you so much.

Raymond

37 years of experience
407 reviews
Raymond
37 years of experience
Oldsmobile Alero V6-3.4L - Car is not starting - Las Vegas, Nevada
Always confident with Raymond's work on my car! He is a professional and answers all my questions with patience and kindness. Thanks Raymond!

Jordan

8 years of experience
87 reviews
Jordan
8 years of experience
Oldsmobile Aurora V8-4.0L - Crankshaft Position Sensor - Kissimmee, Florida
Good guy, knows his stuff. About as real as they get. Grade-A service.

Excellent Rating

(584)

Rating Summary
535
26
5
6
12
535
26
5
6
12
Number of Oldsmobile services completed
6424+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P2403 OBD-II Trouble Code: EVAP Leak Detection Pump Sense Circuit/Open
Diagnostic Diagnostic Trouble Code (DTC): P2403 P2403 code definition EVAP Leak Detection Pump Sense Circuit/Open Related Trouble Codes: P2404: EVAP Leak Detection Pump Sensor Circuit Range/Perf P2405: EVAP Leak Detection Pump Sensor Circuit Low P2406: EVAP Leak Detection Pump Sensor...
How to Replace a Door Latch
A car lock involves the door lock assembly, which includes a car door latch. Replacing this is similar for both electronic and mechanical door locks.
Is an Aftermarket Car Part as Good as an OEM Car Part?
Aftermarket parts are often seen as being of lower quality than OEM car parts but they offer more variety and can be a great cheap auto part option.

Clutch pedal goes down without resistance

Hello. If your clutch pedal goes to the floor and won't return up, your clutch master cylinder or slave has failed, or you have a leak. If you can see that the reservoir for the clutch is full, then the...

O2 sensor or EGR valve?

Hi There, There are a few situations that may cause the O2 sensor to produce a false reading. As you may know the [oxygen sensors]((https://www.yourmechanic.com/services/oxygen-sensor-replacement) which are part of your emissions system read exhaust gases to determine whether or not...

car won't start after timing chain replaced

This would depend on the value of the vehicle and how much money you have into it all together. Oftentimes if the vehicle's value is lower than the amount of money that you have into it it is often better...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com