Oldsmobile 98 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Oldsmobile 98 Power Steering Pump Replacement is $230 with $90 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$460.06Shop/Dealer Price$532.90 - $741.68
1995 Oldsmobile 98V6-3.8L TurboService typePower Steering Pump ReplacementEstimate$600.90Shop/Dealer Price$664.46 - $844.84
1994 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$440.31Shop/Dealer Price$501.89 - $680.78
1995 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$440.31Shop/Dealer Price$501.89 - $680.78
1992 Oldsmobile 98V6-3.8L TurboService typePower Steering Pump ReplacementEstimate$600.90Shop/Dealer Price$668.20 - $851.39
1991 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$395.11Shop/Dealer Price$452.49 - $619.22
1996 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$440.31Shop/Dealer Price$501.91 - $680.82
1992 Oldsmobile 98V6-3.8LService typePower Steering Pump ReplacementEstimate$541.10Shop/Dealer Price$600.16 - $768.17
Show example Oldsmobile 98 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Steven

15 years of experience
425 reviews
Steven
15 years of experience
Oldsmobile 98 V6-3.8L - Oil Pressure Sensor - Tempe, Arizona
Cool guy. Looks out for the customer. He's always my first choice.

Milton

38 years of experience
239 reviews
Milton
38 years of experience
Oldsmobile 98 V6-3.8L - Electric Problems - Las Vegas, Nevada
MIlton informed that the part I understood I needed, I didn't and that my car requires further diagnostic to determine my issue,

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Oldsmobile 98 V6-3.8L - Water Pump - Oakland, California
Tien Wes very good he knows his job,and he is very careful with hard jobs.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Oldsmobile 98 V6-3.8L Turbo - Car is not starting Inspection - Apache Junction, Arizona
Arrived on time with all possible needed tools. Very knowledgeable and was able to locate and repair what other shops were unable to accomplish. Highly recommend him and would call him again.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Oldsmobile 98 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P3443 OBD-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit Low
What What the P3443 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module recognizes that the measured values from the throttle position (TP) sensor, the manifold absolute...
P2227 OBD-II Trouble Code: Barometric Pressure Circuit Range/Performance
P2227 trouble code definition Either the barometric pressure sensor is providing a reading that does not correspond to the parameters of the...
Symptoms of a Bad or Failing Shift Selector Cable
Common signs include the indicator not matching the gear and the vehicle not turning off, starting in another gear, or not going into gear at all.

Loud noise

Your concern sounds like an exhaust leak. A leak in the exhaust system can easily cause drivability issues because the oxygen sensors constantly monitor the exhaust gases and adjust fuel trims accordingly. If a leak is present it will throw...

My car leaked all of the oil from the oil filter and now it's making a loud thumping noise - did the engine pop ?

Hi there: It's really difficult to tell you for certain what's wrong with your Saturn without completing a visual inspection. However, if you had to add half of a gallon of oil, that's not a good indication that internal components...

RPM goes down and never goes up when AC is turn on in ideal

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, turning on AC or engaging the brakes). The Manifold Absolute Pressure (MAP) sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com