Oldsmobile 88 Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Oldsmobile 88 Valve Cover Gasket Replacement is $492 with $156 for parts and $336 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1995 Oldsmobile 88V6-3.8L Turbo	Service typeValve Cover Gasket Replacement	Estimate$700.20	Shop/Dealer Price$790.89 - $1043.52
1996 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$678.58	Shop/Dealer Price$765.03 - $1014.48
1994 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$661.48	Shop/Dealer Price$743.71 - $980.38
1992 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$661.48	Shop/Dealer Price$743.71 - $980.38
1997 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$742.22	Shop/Dealer Price$848.17 - $1148.05
1999 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$742.22	Shop/Dealer Price$844.97 - $1142.45
1995 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$678.58	Shop/Dealer Price$765.12 - $1014.65
1998 Oldsmobile 88V6-3.8L	Service typeValve Cover Gasket Replacement	Estimate$742.22	Shop/Dealer Price$844.63 - $1141.86

Show example Oldsmobile 88 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(48)

Rating Summary

45

1

1

0

1

45

1

1

0

1

SEE REVIEWS NEAR ME

Patrick

6 years of experience

49 reviews

Request Patrick

Patrick

6 years of experience

Request Patrick

by Virini Jackson

88 1998 - Water Pump - Lawrenceville, GA

Patrick is the best mechanic that has ever worked on my car. He is honest and he keeps his word! He said he would work on my car but I had a challenge booking him. A few days later he made good on his promise! My car drives like it's brand new!

Eduardo

15 years of experience

528 reviews

Request Eduardo

Eduardo

15 years of experience

Request Eduardo

by Latoya Reed

88 1995 - Car is shaking or vibrating - Houston, TX

Very knowledgeable and courteous. I also appreciated the fact that he showed me exactly where my problems were and provided a quote right then. Also he was very accomodating as far as scheduling. Absolutely satified with todays appointment.

Chris

15 years of experience

2435 reviews

Chris

15 years of experience

by william l needham

88 1994 - Brake Master Cylinder - Tustin, CA

chriss is a nice guy. he is allways on time, and does a nice job.

Chris

15 years of experience

2435 reviews

Chris

15 years of experience

by william l needham

88 1994 - Power Steering Pump - Tustin, CA

Chris is great person and a very good mechanic. He is on time an does a great job. THANK YOU Chris......... Bill Needham

Excellent Rating

(48)

Rating Summary

45

1

1

0

1

45

1

1

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

Understanding the Saab Oil Life System and Service Indicator Lights

Car symbols, or dashboard lights, are a car service reminder. The Saab Oil Life System (OLS) indicates when and what service your car needs.

P0410 OBD-II Trouble Code: Secondary Air Injection System Malfunction

P0410 code definition Secondary Air Injection System Malfunction What the P0410 code means P0410 is an OBD-II generic code that the engine...

10 Best Stores to Buy Auto Parts in Chicago, Illinois

Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Chicago is AutoZone.

What is causing this stalling problem - 1987 Chevrolet Nova

This is a problem that in most modern cars is now solved with an idle air control module which regulates how the fuel and air is mixed at idle or when coming down to an idle from higher RPM's. In...

Leaking radiator cap

Hello there: Most of the time, the smoke you see coming from the front of the vehicle that has a coolant leak from the radiator cap is steam. This is an indicator that the radiator cap needs to be replaced;...

engine sounds like its running faster than it is, like idle sounds fast but not

Hi there: High idle speed is commonly caused by a vacuum leak, problems with the EGR system or the idle control valve on our 2000 Chevrolet Silverado. The best way to determine which one specifically or other item is causing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com