Oldsmobile 88 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Oldsmobile 88 Mass Airflow Sensor Replacement is $256 with $161 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$440.99Shop/Dealer Price$532.49 - $784.49
1994 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$504.29Shop/Dealer Price$616.63 - $931.12
1995 Oldsmobile 88V6-3.8L TurboService typeMass Airflow Sensor ReplacementEstimate$482.59Shop/Dealer Price$589.51 - $887.72
1993 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$504.29Shop/Dealer Price$616.61 - $931.08
1997 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$420.99Shop/Dealer Price$512.52 - $764.55
1998 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$420.99Shop/Dealer Price$512.51 - $764.52
1992 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$509.29Shop/Dealer Price$621.50 - $935.88
1995 Oldsmobile 88V6-3.8LService typeMass Airflow Sensor ReplacementEstimate$509.29Shop/Dealer Price$621.87 - $936.54
Show example Oldsmobile 88 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(49)

Rating Summary
46
1
1
0
1
46
1
1
0
1

Genaro

13 years of experience
287 reviews
Genaro
13 years of experience
Oldsmobile 88 V6-3.8L - Alternator - Katy, Texas
Job done quick and professionally.

Leo

18 years of experience
122 reviews
Leo
18 years of experience
Oldsmobile 88 V6-3.8L - Starter - Winston Salem, North Carolina
Could not have been any better very professional and competent I would recommend him to anyone I know

Michael

25 years of experience
199 reviews
Michael
25 years of experience
Oldsmobile 88 V6-3.8L - Car is not starting - Charlotte, North Carolina
Micheal was very helpful, and knowledgeable. I would definitely want him to service my vehicle in the future.

Justin

8 years of experience
372 reviews
Justin
8 years of experience
Oldsmobile 88 V6-3.8L - Car is not starting - Deerfield Beach, Florida
Justin was very cool very polite and very patient if I ever need another mechanic it will be Justin and I will refer him to other people

Excellent Rating

(49)

Rating Summary
46
1
1
0
1
46
1
1
0
1
Number of Oldsmobile 88 services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
How Long Does a Crankshaft Position Sensor Last?
The The crankshaft position sensor monitors the rotational speed and position of the crankshaft in the engine. It reports this information to the engine management system to control the ignition system timing. The crankshaft position sensor is used with the...
How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.

What Does the Mass Airflow Sensor Do?

Older systems use a movable vane in the intake stream called a Vane Air Flow (VAF) sensor. The VAF sensor used in Bosch L-Jetronic, Ford, and most Japanese electronic port fuel-injection systems is a movable vane connected to a laser-calibrated...

p0117 code and engine heating to 75% of temp gauge (but no further)

You will have to scan the computer when the engine is cold and look at the data to compare the ECT and the IAT. This is the inlet air temperature sensor and the engine coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). Both sensors...

I have a p0016 code - crankshaft position sensor on FJ Cruiser 2007, how do I replace it

The crankshaft position sensor is located down on the right side (if you are standing facing the engine from the front of the vehicle) of the motor just to the right of the crankshaft pulley. To remove this, disconnect the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com