Nissan Versa Note Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Nissan Versa Note Car Battery Replacement is $295 with $155 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$464.84Shop/Dealer Price$545.90 - $780.98
* Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$516.49Shop/Dealer Price$610.95 - $890.20
* Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$516.49Shop/Dealer Price$610.97 - $890.24
* Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$516.49Shop/Dealer Price$611.11 - $890.49
* Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$589.45Shop/Dealer Price$702.19 - $1036.19
* Nissan Versa NoteL4-1.6LService typeCar Battery ReplacementEstimate$462.01Shop/Dealer Price$542.87 - $781.28
Show example Nissan Versa Note Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Jose

6 years of experience
63 reviews
Jose
6 years of experience
Versa Note 2015 - Battery - South San Francisco, CA
Awesome experience! Jose gave me a few tips on how to maintain my vehicle which was much appreciated.

Christopher

20 years of experience
29 reviews
Christopher
20 years of experience
Versa Note 2014 - Battery - Roswell, GA
Christopher was very friendly and professional; very thorough and honest with the inspection, as well! Best experience with vehicle service I've had and far less inconvenient and stressful than the usual trip to an auto shop, well worth the price.

Augustine

10 years of experience
110 reviews
Augustine
10 years of experience
Versa Note 2015 - Battery - Rio Rancho, NM
Augustine was literally a life saver, he identified the real problem and fixed it. I wish all mechanics were as quick and efficient

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Versa Note 2015 - Windshield Wiper Blade - Vallejo, CA
great job

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan Versa Note Car Battery Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Diagnose an Ignition Key That Won’t Turn
If your car key won't turn in the ignition and your steering wheel locks it's easy to fix. Try jiggling the steering wheel and checking the battery.
P0318 OBD-II Trouble Code: Rough Road Sensor A Signal Circuit
What What the P0318 code means The powertrain control module (PCM) has noticed a change in your crankshaft position. This tells your car that you are experiencing uneven or rough driving. What causes the P0318 code? Any time the PCM...
How to Buy a Good Quality Crankshaft Harmonic Balancer
It It sounds musical, but what it really does is disperse vibrations that travel through the crankshaft to prevent damage to it and other vehicle components. The harmonic balancer, or vibration damper, is made up of two masses that vary...

Oil pressure sensor or oil pump

If you have low oil pressure indication and getting engine noise then the oil pump is most likely the cause and not the oil sending unit. In order to verify the cause the oil pressure would need to be checked...

My air conditioner is not working , but my heater is , what can be the problem

Hello. Thank you for writing in. The A/C (https://www.yourmechanic.com/services/heating-ac-inspection) system and the heating system have relatively little to do with each other. They share a blower motor, and climate control switches. With the heater working we can assume that these...

Rough Idle After Engine has Heated up.

Hi there. Check the engine oil pressure. When the oil is cold, it is thick and when its warm its thinned out. If the oil pressure drops lower than 25 psi, then the variable valve timing solenoids will not work....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com