Nissan 720 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(8)

Fuel Injector Replacement Estimate for Nissan 720

Nissan 720 Fuel Injector Replacement costs $1022 on average.

CarServiceEstimateShop/Dealer Price
1981 Nissan 720L4-2.2LService typeFuel Injector ReplacementEstimate$1983.43Shop/Dealer Price$2462.91 - $3865.08
1983 Nissan 720L4-2.4LService typeFuel Injector ReplacementEstimate$2195.05Shop/Dealer Price$2732.44 - $4302.71
1984 Nissan 720L4-2.0LService typeFuel Injector ReplacementEstimate$1904.05Shop/Dealer Price$2368.69 - $3720.70
1984 Nissan 720L4-2.4LService typeFuel Injector ReplacementEstimate$2195.05Shop/Dealer Price$2732.40 - $4302.64
1982 Nissan 720L4-2.2L DieselService typeFuel Injector ReplacementEstimate$1707.07Shop/Dealer Price$2124.00 - $3338.43
1986 Nissan 720L4-2.4LService typeFuel Injector ReplacementEstimate$2195.05Shop/Dealer Price$2732.44 - $4302.70
1983 Nissan 720L4-2.2LService typeFuel Injector ReplacementEstimate$1963.93Shop/Dealer Price$2443.25 - $3845.31
1981 Nissan 720L4-2.2L DieselService typeFuel Injector ReplacementEstimate$1713.57Shop/Dealer Price$2130.79 - $3345.44
Show example Nissan 720 Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Bryan

5 years of experience
64 reviews
Bryan
5 years of experience
Nissan 720 L4-2.4L - Car is not starting - Carson, California
Bryan was a great guy, pleasent & honest. He determined that the part didn't need replacing after all but kept with it to help figure out issue. He was on time & helpful with info. Thank you Bryan

Nazareth

27 years of experience
240 reviews
Nazareth
27 years of experience
Nissan 720 L4-2.4L - Car does not shift from park to drive - Altadena, California
Very friendly professional mechanic. He diagnosed the problem right away and offered great advice.

Jay

37 years of experience
910 reviews
Jay
37 years of experience
Nissan 720 L4-2.4L - Brakes, Steering and Suspension Inspection - Redlands, California
The main thing is Jay is on time and knowledgeable. If he can't fix something he knows who can. He checks everything.

Rodney

36 years of experience
515 reviews
Rodney
36 years of experience
Nissan 720 L4-2.4L - Starter - Stockton, California
Rodney was here early and finished the job in a short time . Very good Job !

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan 720 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1400+
experts on our platform

Recent articles & questions

What Typically Causes the Heating or AC to Stop Working?
While both the heating and AC are connected - to an extent - within your car, they’re actually...
How to Build Weather Pack Connectors
Weather Weather pack connectors started off as a Delphi product and quickly became commonplace in the automotive world. Most wiring systems use weather pack connectors in their assembly due to their benefits when compared to standard connectors. Weather pack connectors...
Disabled Driver Laws and Permits in Pennsylvania
In In Pennsylvania, if you are disabled or someone else in your car has a disability, you can get a license plate or placard that will allow you to park in special spaces, depending on the nature of the disability....

Getting 2 then 4 abs codes, brake shutters, speedo dies and engine slowes when Brake and absolutely lights come on,

You definitely want to start by inspecting the front and rear wheel speed sensors; a failure in these circuits will result in several other problems. Begin by connecting a scanner to see if the Powertrain Control Module (PCM) is registering...

Leak caused by corrosion on throttle body terminal

Hello. There are some fairly sensitive electronics inside the throttle position sensor (TPS) housing. They are also not engineered to be easily disassembled for repair either. Unless you are quite experienced at unsoldering and soldering printed circuit board connections, I...

Car wont turn over. New battery and ignition coils.

Be sure the battery is actually fully charged (even a new battery can be discharged). If the starter motor is not even cranking the engine, among the first possibilities is a weak battery, excessive voltage drop in the starter circuit...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com