Nissan 720 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Nissan 720 Brake Pad Replacement is $171 with $76 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1980 Nissan 720L4-2.0LService typeBrake Pads - Rear ReplacementEstimate$428.64Shop/Dealer Price$502.06 - $681.81
1983 Nissan 720L4-2.2LService typeBrake Pads - Rear ReplacementEstimate$322.80Shop/Dealer Price$378.79 - $506.18
1983 Nissan 720L4-2.5L DieselService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1985 Nissan 720L4-2.5L DieselService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.64 - $443.12
1985 Nissan 720L4-2.4LService typeBrake Pads - Front ReplacementEstimate$271.65Shop/Dealer Price$325.85 - $465.87
1983 Nissan 720L4-2.4LService typeBrake Pads - Rear ReplacementEstimate$328.37Shop/Dealer Price$391.24 - $548.29
1984 Nissan 720L4-2.0LService typeBrake Pads - Front ReplacementEstimate$291.85Shop/Dealer Price$349.70 - $501.00
1984 Nissan 720L4-2.4LService typeBrake Pads - Rear ReplacementEstimate$335.37Shop/Dealer Price$398.57 - $555.87
Show example Nissan 720 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Nissan 720 L4-2.2L - Clutch Slave Cylinder - Portland, Oregon
My clutch slave cylinder required a special bleeding procedure to achieve maximum performance, as noted in the original Nissan Service Manual, and Chris knew this and performed the procedure as required in the manual. This knowledge impressed me. Chris was also courteous and easy to talk to about other fixes needed on my vehicle. A very satisfying experience, although the job was fairly simple.

Rodney

36 years of experience
541 reviews
Rodney
36 years of experience
Nissan 720 L4-2.4L - Starter - Stockton, California
Rodney was here early and finished the job in a short time . Very good Job !

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Nissan 720 L4-2.4L - Brakes, Steering and Suspension Inspection - Redlands, California
The main thing is Jay is on time and knowledgeable. If he can't fix something he knows who can. He checks everything.

Bryan

5 years of experience
64 reviews
Bryan
5 years of experience
Nissan 720 L4-2.4L - Car is not starting - Carson, California
Bryan was a great guy, pleasent & honest. He determined that the part didn't need replacing after all but kept with it to help figure out issue. He was on time & helpful with info. Thank you Bryan

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan 720 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Lincoln MKT
This This roomy wagon definitely has a different look – its bold and somewhat retro lines, draw attention in a way Lincoln hasn’t experienced since perhaps the ’78 Town Car. While the MKT may not be the sleekest, sportiest crossover...
How Long Does a Fog Light Relay Last?
All All vehicles come equipped with headlights, and some vehicles offer you more in terms of lighting. Fog lights are a popular option with drivers as they are perfect for foggy conditions obviously, as well as snow, rain, and any...
How to Buy a Personalized License Plate in California
There There are a lot of cars in California, so it can be hard to make yours stand out. For many, a personalized license plate is the perfect way to make their car different from the many other cars on...

The engine comes close to shutting off while idling

This is a sign of a dirty or failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the motor at low speeds or...

Car struggles to go up hills and only goes 40-60 mph depending how steep the hill is. What's wrong with my car?

Hi there: Anytime a check engine light is illuminated it's because a sensor has detected a mechanical or electrical fault that impacts the vehicle's performance. If the mechanic you go to hasn't completed a check engine light inspection; which means...

thumping sound from rear

Charcoal canisters don't become clogged, although in exceptional cases, they can become saturated with liquid fuel which ruins their ability to store fuel vapors. If the premature shut of the refueling nozzle is occasional that is not an issue but...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com