Nissan 610 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(58)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(58)

Control Arm Assembly Replacement Estimate for Nissan 610

Nissan 610 Control Arm Assembly Replacement costs $491 on average.

CarServiceEstimateShop/Dealer Price
1974 Nissan 610L4-2.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$836.51Shop/Dealer Price$1009.11 - $1445.99
1975 Nissan 610L4-2.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$772.35Shop/Dealer Price$943.46 - $1375.76
1974 Nissan 610L4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$694.72Shop/Dealer Price$854.76 - $1284.58
1976 Nissan 610L4-2.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$694.72Shop/Dealer Price$854.72 - $1284.51
1974 Nissan 610L4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$539.09Shop/Dealer Price$651.93 - $909.31
1975 Nissan 610L4-2.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$828.67Shop/Dealer Price$1013.86 - $1488.39
1975 Nissan 610L4-2.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$865.25Shop/Dealer Price$1055.56 - $1546.36
1973 Nissan 610L4-1.8LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$786.85Shop/Dealer Price$958.64 - $1391.45
Show example Nissan 610 Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(58)

Rating Summary
54
1
0
0
3
54
1
0
0
3

Daniel

11 years of experience
221 reviews
Daniel
11 years of experience
Nissan Murano V6-3.5L - Control Arm Assembly Replacement (Front Lower Left) - Chicago, Illinois
Always friendly, great with communication, fast, knowledgeable. Finished my car waaaay faster than what was estimated.

Richard

20 years of experience
126 reviews
Richard
20 years of experience
Nissan Rogue L4-2.5L - Control Arm Assembly Replacement (Front Lower Left) - Arlington, Texas
Very knowledgeable and fair. Recommend wholeheartedly.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Nissan Murano V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Jacksonville, Florida
Joel is great.

Victor

11 years of experience
211 reviews
Victor
11 years of experience
Nissan Rogue L4-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Virginia Beach, Virginia
He arrived on time and was very professional. He made sure I saw the bad part before he put on the new part. I would use him again.

Excellent Rating

(58)

Rating Summary
54
1
0
0
3
54
1
0
0
3
Number of Nissan Control Arm Assembly Replacement services completed
638+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Oklahoma
All All drivers in the state of Oklahoma are required to carry automotive liability insurance, or “financial responsibility,” on their vehicles in order to operate a vehicle legally and maintain vehicle registration. The minimum financial responsibility requirements for Oklahoma...
Top Automotive News & Stories: July 27-August 3
Each week we compile the best announcements and developments from the world of cars. Here are the topics you can’t miss from July 27 to August 3. Most Stolen Cars List Released most stolen cars...
How to Get Smog Technician Certified in New York
Automotive technician jobs include smog certified emissions inspectors. In New York, you need to work at a state licensed inspection station.

What do the error messages mean on the CD player?

Your Accord’s audio system is advanced enough to give you some information if an error occurs during operation. This information can help with troubleshooting, as well as understanding why a disc might not play. Here’s a quick summary of the...

Soft close trunk feature not working

This is a common issue on your car. Most of the time it is caused by a programming issue. The rear module needs to be reprogrammed to fix this. If the problem continues then the contact sensors may have failed....

My oil level is low and I just had my oil changed.

If that much oil was leaking or being burned in such a short period of time, there would generally be some drivability concern as well like blue smoke, running rough or stalling. It is possible the attendant may have poured...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com