Nissan 370Z Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(57)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(57)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan 370Z Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2011 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2009 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2018 Nissan 370ZV6-3.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Nissan 370Z Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(57)

Rating Summary
53
2
0
0
2
53
2
0
0
2

Shaun

21 years of experience
204 reviews
Shaun
21 years of experience
Nissan 370Z V6-3.7L - Pre-purchase Car Inspection - San Ramon, California
Friendly and knowledgeable. Came right on time.

Shawn

12 years of experience
291 reviews
Shawn
12 years of experience
Nissan 370Z V6-3.7L - Oil Change - Gilbertsville, Pennsylvania
Great experience! Shawn was on time; I left him the keys and it went great.

Michael

38 years of experience
135 reviews
Michael
38 years of experience
Nissan 370Z V6-3.7L - Pre-purchase Car Inspection - Placentia, California
Great communication. Professional. Knowledgeable.

Russell

24 years of experience
356 reviews
Russell
24 years of experience
Nissan 370Z V6-3.7L - Oil Change - Portland, Oregon

Excellent Rating

(57)

Rating Summary
53
2
0
0
2
53
2
0
0
2
Number of Nissan 370Z services completed
627+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

P0210 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 10
P0210 P0210 code definition Injector Circuit Malfunction - Cylinder 10 What the P0210 code means P0210 will be seen when the Engine Control Module (ECM) has found a malfunction within the cylinder 10 fuel injector circuit. The ECM constantly looks...
Top Automotive News & Stories: August 13-19
This week's top auto news: Self driving Ford, Volkswagen security hack, sleek Mercedes-Maybach concept, Audi green light countdown, and more.
B1923 OBD-II Trouble Code: Air Bag Memory Clear Circuit Short To Ground
B1923 means there is an issue with the airbag system, likely due to a faulty memory module, bad battery, or defective electrical wiring.

Window not working

Hello. I will assume your drivers front window is not working. A mechanic can check the fuses for the window for any that may have blown. In the event of a blown fuses, some trouble in the circuit caused the...

Mass air flow sensor

Hello. The first thing that I would suggest is that you return the mass airflow sensor and get a new one. The mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) you installed could be defective causing the same issue you were having previously. Make...

How to clear the code after installing camshaft position sensor

The only way to clear any codes that may be stored in the computer memory is to have a scanner access and clear the codes. If you need an mechanic like one from YourMechanic to scan the computer and clear...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com