Nissan 370Z Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(56)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(56)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Nissan 370Z Power Steering Pump Replacement is $470 with $347 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$842.83Shop/Dealer Price$1029.16 - $1558.92
2016 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$1750.09Shop/Dealer Price$2169.76 - $3399.48
2010 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$816.83Shop/Dealer Price$1003.18 - $1532.96
2018 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$1750.09Shop/Dealer Price$2169.73 - $3399.43
2009 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$816.83Shop/Dealer Price$1003.21 - $1532.99
2011 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$816.83Shop/Dealer Price$1003.18 - $1532.96
2015 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$823.33Shop/Dealer Price$1009.51 - $1539.15
2014 Nissan 370ZV6-3.7LService typePower Steering Pump ReplacementEstimate$823.33Shop/Dealer Price$1009.99 - $1540.00
Show example Nissan 370Z Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(56)

Rating Summary
52
2
0
0
2
52
2
0
0
2

Andrew,

5 years of experience
161 reviews
Andrew,
5 years of experience
Nissan 370Z V6-3.7L - Battery - Dallas, Texas
Great service

Russell

27 years of experience
271 reviews
Russell
27 years of experience
Nissan 370Z V6-3.7L - Wheel Stud Replacement (Driver Side Front) - Hayward, California
He was on time. Did a good job. Thank#

Chris

16 years of experience
419 reviews
Chris
16 years of experience
Nissan 370Z V6-3.7L - Oil Change - San Francisco, California
Quick and knows what hes doing. He also double checked his work to ensure that everything was on point. Great service. Chris was also very friendly and happy to answer any questions I had regarding the car.

Francisco

18 years of experience
65 reviews
Francisco
18 years of experience
Nissan 370Z V6-3.7L - Oil Change - Addison, Texas
Second time using Francisco, definitely recommended.

Excellent Rating

(56)

Rating Summary
52
2
0
0
2
52
2
0
0
2
Number of Nissan 370Z services completed
616+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Hyundai Sonata Hybrid
When When Toyota first introduced the Prius, the idea seemed to be that all hybrids and electric cars had to have their own specific models and that they couldn’t look like normal cars. A lot of consumers weren’t too thrilled...
A Buyer’s Guide to the 2012 Toyota RAV4
While While the Honda CR-V might have been the pioneer of the compact SUV market, there’s no question that the 2012 Toyota RAV4 is king of the class. Not only does the RAV4 come with your choice of either a...
What is Brake Fade?
Brake fade is the temporary loss or reduction of full brake power. Learn how to reduce the chances of it happening to you.

Fluttering noise when accelerating

The noise you are hearing is most likely a broken door or window seal that is letting air into the passenger compartment, causing the fluttering you are describing. I would suggest having a certified mechanic run a noise inspection (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection)...

Replaced only 1 tire in AWD vehicle.

It is recommended on any vehicle with AWD (all-wheel-drive) to replace all four tires (https://www.yourmechanic.com/article/how-to-know-when-to-replace-tires_2) at the same time. The reason behind this need is due to the computer on the vehicle constantly monitoring the speed of each wheel. The...

Car passenger seat will not move - 2005 Mercedes-Benz CLK320

If the seat is electrically powered, there can be a number of reasons for it not to work. A blown fuse or relay to that seat will not allow power to get to the switches or electric motors. Also, a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com