Nissan 350Z Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(277)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(277)

Exhaust Gas Recirculation/EGR Valve Replacement Estimate for Nissan 350Z

Nissan 350Z Exhaust Gas Recirculation/EGR Valve Replacement costs $354 on average.

CarServiceEstimateShop/Dealer Price
2003 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$613.31Shop/Dealer Price$754.04 - $1148.33
2005 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$601.31Shop/Dealer Price$743.30 - $1138.54
2007 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$593.39Shop/Dealer Price$733.40 - $1122.69
2004 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$601.31Shop/Dealer Price$743.27 - $1138.49
2009 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$593.39Shop/Dealer Price$733.42 - $1122.72
2006 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$601.31Shop/Dealer Price$743.30 - $1138.53
2008 Nissan 350ZV6-3.5LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$598.89Shop/Dealer Price$738.75 - $1127.93
Show example Nissan 350Z Exhaust Gas Recirculation/EGR Valve Replacement prices

Exhaust Gas Recirculation/EGR Valve Replacement Service

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(277)

Rating Summary
257
10
2
4
4
257
10
2
4
4

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Nissan 350Z V6-3.5L - Clutch Master Cylinder & Slave Cylinder Replacement - Auburn, Washington
Nice person, Did a great job replacing the master and slave clutch. Very knowledgeable and troubleshooting failures . I would recommend this mechanic to all my friends ! And the price was very reasonable !

Fabrice

20 years of experience
134 reviews
Fabrice
20 years of experience
Nissan 350Z V6-3.5L - Oil Change - Longwood, Florida
Fabrice was professional and did a good job.

Oscar

24 years of experience
72 reviews
Oscar
24 years of experience
Nissan 350Z V6-3.5L - Crankshaft Position Sensor - Hyattsville, Maryland
Overall, I feel very satisfied with Oscars care of my vechicle. I already have recommended him to a couple of people so far. I look forward to making another appointment with him very soon.

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Nissan 350Z V6-3.5L - Brake Pads Replacement (Front, Rear) - Menlo Park, California
Solid guy, worked with me on the best option for my situation. Service was fantastic as well.

Excellent Rating

(277)

Rating Summary
257
10
2
4
4
257
10
2
4
4
Number of Nissan 350Z services completed
3047+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Is It Safe to Drive During Lightning?
You You have almost certainly heard that the best place for you to be in a lightning storm is in your car, but is that really true? Not necessarily. Of course there are worse places to be, like a golf...
How Long Does a Mass Airflow Sensor Last?
The The right amount of air and fuel in your engine is a vital component in keeping the engine running as it should. Making sure that all of the vital components of the air and fuel system are running at...
How to Clean Cylinder Heads
The The engine cylinder head has many passages for coolant and oil and can build up dirt over the life of the engine. Once the cylinder head is removed from the vehicle, it becomes a simple matter to clean up...

Chirping rattling noise hood

The tensioner pulley is near the top center of the engine. It is easy to spot as the back of the belt rides on the tensioner pulley and not the ribbed side. Removing the belt to access the pulley...

My back up lights haven't been working for quite awhile.. I'm not sure where to find the fuse to check if it's blown.. what should I do.. I don't know if it's a short or what..

My cx5 won't start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com