Nissan 280ZX Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Car Battery Replacement Estimate for Nissan 280ZX

Nissan 280ZX Car Battery Replacement costs $251 on average.

CarServiceEstimateShop/Dealer Price
1983 Nissan 280ZXL6-2.8LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$512.39 - $761.69
1979 Nissan 280ZXL6-2.8LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1983 Nissan 280ZXL6-2.8L TurboService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1981 Nissan 280ZXL6-2.8LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.39 - $741.68
1982 Nissan 280ZXL6-2.8L TurboService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.42 - $741.75
1982 Nissan 280ZXL6-2.8LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1981 Nissan 280ZXL6-2.8L TurboService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.27 - $746.48
1980 Nissan 280ZXL6-2.8LService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.64 - $747.14
Show example Nissan 280ZX Car Battery Replacement prices

Car Battery Replacement Service

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Joseph

33 years of experience
540 reviews
Joseph
33 years of experience
Nissan 280ZX L6-2.8L - Clutch Master Cylinder - Dallas, Texas
Joseph was prompt, knowledgable, tested thoroughly and was a pleasure to work with.

Raul

34 years of experience
285 reviews
Raul
34 years of experience
Nissan 280ZX L6-2.8L - Car is not starting - Fremont, California

Trung

12 years of experience
412 reviews
Trung
12 years of experience
Nissan 280ZX L6-2.8L - Smell in the car - Santa Clara, California
Trung did an excellent job. Found out the gas smell was a fuel canister hose that needed to be replaced.

Eduardo

12 years of experience
41 reviews
Eduardo
12 years of experience
Nissan 280ZX L6-2.8L - Oil Change - Anaheim, California
This service was excellent. He was prompt, professional, and very knowledgeable! Thanks Eduardo! I'll DEFINITELY use this service again!

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Nissan 280ZX services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How to Purchase an Austin Healey
The Austin Healey is a small British roadster that has a very large following among collectors. The cars are made up of just a handful of parts, and are a great choice for those just venturing into the world of...
How to Replace a Tailgate Locking Assembly
The tailgate locking assembly controls the lock and can be activated from a key fob or the driver lock controls.
What car owners need to know about tune ups
Everything you need to know about car tune ups

Do wiring harnesses need to be replaced?

As automotive electrical systems increase with each model year, so does the amount of wiring required to operate them. BMW says their current models can contain up to a mile of wires weighing as much as 130lbs! All of this...

Engine over heats no heat

If you do not have any circulation through the radiator then you may have a clogged radiator cores inside. If you used stop leak in the engine then you may have plugged up the radiator and heater core. You should...

Engine gets hot, heater blows cold air

Hi Ray. Thanks for contacting us today. When the engine gets hot and the heater blows cold air, it's usually caused by either an obstruction of debris inside the heater core. When a water pump or thermostat does not work,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com