Nissan 240SX Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(44)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(44)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Nissan 240SX Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1995 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Nissan 240SXL4-2.4LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Nissan 240SX Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(44)

Rating Summary
36
5
2
1
0
36
5
2
1
0

Chad

16 years of experience
76 reviews
Chad
16 years of experience
Nissan 240SX L4-2.4L - Spark Plugs - Chesterfield, Virginia
Very friendly and professional

Dan

39 years of experience
981 reviews
Dan
39 years of experience
Nissan 240SX L4-2.4L - Smoke from engine or exhaust - Jefferson, Georgia
Dan was thorough and precise in his diagnosis. It was spot on. He was cordial, courteous, and professional. Thanks for hiring the best.

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Nissan 240SX L4-2.4L - Car is not starting - Baltimore, Maryland
Jerome arrived early and went right to work. he got the car started and a diagnoses as to what the problem most likely is.

Steven

14 years of experience
425 reviews
Steven
14 years of experience
Nissan 240SX L4-2.4L - Starter - Peoria, Arizona
Came to fix a leaking clutch master cylinder in my 240sx. He was very timely easy to talk to. Did a great job. Would definitely hope to get Steven again if anything else goes wrong in the future... If it's still left stock lol.

Excellent Rating

(44)

Rating Summary
36
5
2
1
0
36
5
2
1
0
Number of Nissan 240SX services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How Long Does a Clutch Slave Cylinder Last?
The The clutch slave cylinder is located on the inside or outside of the transmission. If the slave cylinder is mounted on the outside of the transmission, it is normally attached by two bolts. Every time hydraulic pressure is applied,...
How to Make Your Own Windshield Washer Fluid
It's easy to make windshield washer fluid with common ingredients. Homemade washer fluid can be more environmentally friendly than conventional fluid.
P0274 OBD-II Trouble Code: Cylinder 5 Injector Circuit High
P0274 P0274 code definition P0274 is a trouble code that denotes an above average draw of current from the number five cylinder’s fuel injector. What the P0274 code means If you see this code, it means your vehicle’s engine cylinder...

Do I need a special tool to remove the knock sensor?

Hello. There does not appear to be any special tool required to remove the knock sensor on an 84 Corvette. Only the correct size socket should be needed in order to loosen and remove the sensor. The sensor is located...

I changed my mas and the check engine light came back on what next

You will need to have the computer scanned to see why the light came back on. If you continue to get codes to the mass air sensor then you should have the pinpoint test completed that will test the system...

When i start my car toyota rav4 2011 it revs way high for about one second, then sounds normal and drives fine. Thoughts?

When the engine first starts it is normal for the computer to raise the idle up momentarily to keep the engine running. If you have not got the recall done for the smart stop for the vehicle then have the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com