Mitsubishi Outlander PHEV Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,963)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,963)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mitsubishi Outlander PHEV Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mitsubishi Outlander PHEVL4-2.4L HybridService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Mitsubishi Outlander PHEVL4-2.0L HybridService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Mitsubishi Outlander PHEVL4-2.0L HybridService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Mitsubishi Outlander PHEVL4-2.0L HybridService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2022 Mitsubishi Outlander PHEVL4-2.4L HybridService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example Mitsubishi Outlander PHEV Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(1,963)

Rating Summary
1,835
73
15
13
27
1,835
73
15
13
27

Raymond

27 years of experience
247 reviews
Raymond
27 years of experience
Mitsubishi Montero V6-3.8L - Drive Belt Tensioner - Hesperia, California
Very Professional and friendly. Does the job right.

David

16 years of experience
637 reviews
David
16 years of experience
Mitsubishi Eclipse L4-2.4L - Automatic Transmission Fluid Service - Concord, California
I've used David a couple of times and would recommend him wholeheartedly

Rodric

14 years of experience
417 reviews
Rodric
14 years of experience
Mitsubishi Montero V6-3.8L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Atlanta, Georgia
Thanks again Rodric!

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Mitsubishi Endeavor V6-3.8L - Timing Belt - Jacksonville, Florida
Great Job! Thank you!!

Excellent Rating

(1,963)

Rating Summary
1,835
73
15
13
27
1,835
73
15
13
27
Number of Mitsubishi services completed
21593+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

How a Car's Cooling System Works
Have Have you ever considered the thousands of times explosions occur in your engine? If you're like most people, that thought never enters your mind. Every time a spark plug fires, the fuel and air mixture in that cylinder blows...
The Best Used Cars to Buy If You're a General Contractor
If If you're a general contractor, you probably aren’t in the market for a used car. More likely, you’re looking for a pickup truck, because you need to haul equipment and supplies to various job sites. Most contractors will likely...
P0258 OBD-II Trouble Code: Injection Pump Fuel Metering Control “B” Low (Cam/Rotor/Injector)
P0258 P0258 code definition Injection Pump Fuel Metering Control “B” Low (Cam/Rotor/Injector) What the P0258 code means P0258 is an OBD-II generic code for the injection pump fuel metering control valve circuit having low or no current flow when the...

Car stalled and now won't start

The first two codes point to the bank 2 sensor 2 and could be a problem with the wiring to the sensor or the catalyst is broken up and clogged the exhaust. The last code P0402 is for the EGR...

Temperature gauge sits on cold always

This is a common issue on this generation of the Chevy Malibu. This could be any one of a few problems. This could be a result of a bad BCM (Body Control Module). This is a module in your car...

Hello I have a question I have a 2005 Chrysler and my check ingen light came on and my the lightning bult I tryed starting it and

The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com