Mitsubishi Eclipse Cross Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mitsubishi Eclipse Cross Control Arm Assembly Replacement is $408 with $294 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$852.56Shop/Dealer Price$1022.58 - $1480.89
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$806.56Shop/Dealer Price$976.62 - $1434.96
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$702.07Shop/Dealer Price$861.11 - $1311.18
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$702.07Shop/Dealer Price$861.08 - $1311.14
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$702.07Shop/Dealer Price$861.13 - $1311.22
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$702.07Shop/Dealer Price$861.11 - $1311.18
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$708.07Shop/Dealer Price$866.95 - $1316.90
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$708.07Shop/Dealer Price$867.39 - $1317.68
Show example Mitsubishi Eclipse Cross Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Eliseo

12 years of experience
239 reviews
Eliseo
12 years of experience
Mitsubishi Mirage L3-1.2L - Control Arm Assembly Replacement (Front Lower Right) - Houston, Texas
Very professional and great work

Steven

21 years of experience
200 reviews
Steven
21 years of experience
Mitsubishi Lancer L4-2.0L - Control Arm Assembly Replacement (Front Lower Right) - Weatherford, Texas
No problem. Every thing went well. Steven had the job done very quickly. New what he was doing. Look forward to using him in the near future. Great job.

Michael

40 years of experience
131 reviews
Michael
40 years of experience
Mitsubishi Eclipse L4-2.4L - Control Arm Assembly Replacement (Front Lower Right) - Columbus, Ohio
Great work, on time and very friendly and nice. Knows what he is doing and knows his way around cars. Will have him do more work with my car.

Stephen

25 years of experience
48 reviews
Stephen
25 years of experience
Mitsubishi Eclipse V6-3.0L - Control Arm Assembly Replacement (Front Lower Right) - Charleston, South Carolina
Mechanic arrived on time. Very knowledgeable. He did a great work in a short time. I have booked him for another service and i would recommend him to anyone.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Mitsubishi Control Arm Assembly Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Get a Car For Free When You Have a Disability
If If you have a disability it is often quite difficult to get around. This often limits your ability to find gainful employment, make it to appointments, and is even a barrier to essentials like buying groceries. You may be...
P0188 OBD-II Trouble Code: Fuel Temperature Sensor "B" Circuit High Input
P0188 P0188 trouble code definition Fuel Temperature Sensor "B" Circuit High Input What the P0188 code means The fuel temperature sensor identifies the presence of contamination, such as water, ethanol, or dirt. It also measures the fuel temperature inside the...
How to Advertise Your Used Car With a Window Display
To To have more success when trying to sell your vehicle (https://www.yourmechanic.com/article/how-to-be-successful-when-selling-a-car-by-jason-unrau) it is necessary to advertise it even when you are on the go. In addition to cleaning your vehicle and making sure it looks its best, displaying for-sale...

Having a problem with Anti Lock Brake System and/or Traction Control

The most likely cause of this issue would be a wheel/vehicle speed sensor (https://www.yourmechanic.com/parts/vehicle-speed-sensor) or an ABS control module (https://www.yourmechanic.com/parts/abs-control-module). The wheel speed sensors are what sends the data of what the wheels are doing, and the ABS module receives...

Battery is dead and engine doesn't crank

Hello! I'll be happy to assist you. I believe the issue may be the ignition key tumbler. The wires inside of the steering column connecting to the ignition key tumbler to the steering column tend to break. The wiring may...

Oil burning off 1 1/2 quarts every 200 miles

Hello there, thank you for asking about your 1994 Isuzu Pickup. For your vehicle, minimum compression is 114 PSI and all cylinders should read within 70% of each other. So, according to your results, compression is good. My guess is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com