Mini Cooper Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mini Cooper Car Battery Replacement is $303 with $163 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mini CooperL4-1.6L TurboService typeCar Battery ReplacementEstimate$680.38Shop/Dealer Price$818.03 - $1216.79
2012 Mini CooperL4-1.6L TurboService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$805.92 - $1202.37
2013 Mini CooperL4-1.6L TurboService typeCar Battery ReplacementEstimate$700.57Shop/Dealer Price$835.82 - $1232.78
2016 Mini CooperL4-2.0L TurboService typeCar Battery ReplacementEstimate$679.07Shop/Dealer Price$808.94 - $1189.77
2020 Mini CooperElectricService typeCar Battery ReplacementEstimate$500.69Shop/Dealer Price$586.06 - $833.18
2019 Mini CooperL4-2.0L TurboService typeCar Battery ReplacementEstimate$700.57Shop/Dealer Price$834.31 - $1230.14
2004 Mini CooperL4-1.6LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$805.99 - $1202.49
2006 Mini CooperL4-1.6LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$805.97 - $1202.44
Show example Mini Cooper Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mini mechanics

Real customer reviews from Mini owners like you.

Excellent Rating

(43)

Rating Summary
42
0
0
0
1
42
0
0
0
1

Tinashe

10 years of experience
534 reviews
Tinashe
10 years of experience
Cooper 2013 - Battery - Atlanta, GA
Quick and professional!

Arturo

25 years of experience
253 reviews
Arturo
25 years of experience
Cooper 2014 - Battery - San Diego, CA
Mechanic was very professional and worked hard. Great to see his level of experience. Hopefully I'll work with Arturo in the future for maintenance service!

Dominic

0 years of experience
231 reviews
Dominic
0 years of experience
Cooper 2014 - Battery - Fort Myers, FL
Excellent service

Mohammed

7 years of experience
152 reviews
Mohammed
7 years of experience
Cooper 2009 - Battery - Raleigh, NC
Mr. Mohammed diagnosed my car to determine that the problem was, in fact, my battery. He quickly and efficiently replaced my old battery with a new one and my car is up and running again!

Excellent Rating

(43)

Rating Summary
42
0
0
0
1
42
0
0
0
1
Number of Mini Cooper Car Battery Replacement services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mini MECHANICS
400+
experts on our platform

Recent articles & questions

A Mechanic's Guide to Automotive Careers
Automotive careers have high job security and an ability to work anywhere in the world. Get ASE certified to become an automotive master mechanic.
Top 10 Scenic Drives in South Dakota
South Dakota may not get a lot of play outside of seeing Mount Rushmore as a tourist destination, but that doesn’t mean there isn’t an array of recreational opportunities and scenic views. It just means the state’s most treasured areas...
How to Obtain an A6 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be an A6 Electrical System Repair Technician.

I am getting a P0171 code. It runs smooth and the fuel trim is good at idle. Under load the trim goes high.

If your fuel trims are ok at idle,but seem to climb when a load is applied to the engine the problem may be in the fuel delivery or air metering. A clogged fuel filter may disrupt the flow up fuel...

I have a 2000 Chevy blazer won't go in 4wD.

There is a device on the transfer case that makes the mechanical engagement that allows power to be transferred to the front wheels. If the power and ground signals are present here and there is no engagement, suspect the actuator....

I got a 2012 ford explore it wont start it say no key detected

Many of the cars made in the last ten years have additional security built into the key. There is a tiny radio transmitter built into the fob end of the key and a ring around the keyhole acts as an...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com