Mercury Voyager Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(11)

Control Arm Assembly Replacement Estimate for Mercury Voyager

Mercury Voyager Control Arm Assembly Replacement costs $256 on average.

CarServiceEstimateShop/Dealer Price
1966 Mercury VoyagerL6-2.8LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$407.11Shop/Dealer Price$496.29 - $735.93
1966 Mercury VoyagerL6-2.8LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$348.71Shop/Dealer Price$428.31 - $639.16
1967 Mercury VoyagerV8-4.7LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$387.11Shop/Dealer Price$476.31 - $715.96
1966 Mercury VoyagerV8-7.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$238.31Shop/Dealer Price$290.29 - $418.32
1967 Mercury VoyagerV8-7.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$306.47Shop/Dealer Price$375.52 - $554.71
1967 Mercury VoyagerV8-6.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$808.25Shop/Dealer Price$1002.73 - $1558.24
1967 Mercury VoyagerV8-4.7LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$311.47Shop/Dealer Price$380.37 - $559.44
1967 Mercury VoyagerL6-3.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$813.25Shop/Dealer Price$1007.97 - $1563.66
Show example Mercury Voyager Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Jose

25 years of experience
64 reviews
Jose
25 years of experience
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Oakland, California
Amazing work

David

11 years of experience
225 reviews
David
11 years of experience
Mercury Grand Marquis V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Kansas City, Missouri
Other than being late, David was great!

Matthew

33 years of experience
1144 reviews
Matthew
33 years of experience
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Hampton, Virginia
Awesome service, quick and clean even after the repair. I will definitely ask my next service to him.

Bryant

12 years of experience
562 reviews
Bryant
12 years of experience
Mercury Grand Marquis V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Carmel, Indiana
Very friendly and honest

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mercury Control Arm Assembly Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Save Money on a Used Car
Saving money when buying a used car is quick and easy when you follow some simple steps. Used cars can be purchased through the local paper, an auto auction, online, or at a local dealership. In any case, make sure...
How Traffic Jams Start
It’s It’s a Friday afternoon and you decide to cut out of work early to get a head start on the weekend. As you hit the highway, you notice that traffic is moving along really well. With any luck, you’ll...
10 Best Stores to Buy Auto Parts in Augusta, Georgia
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Augusta is Advance Auto Parts.

Car won't start - 2011 Lexus ES350

Hi and thank you for contacting YourMechanic. Even though your accessories are still functioning, the rapid clicking noise you are hearing is the battery not having enough power to turn your engine over and start. If your battery does not...

Oil pressure repair cost, Oil Light comes on, and Check Engine Light is on - code P0022

Its a 2008 dodge sprint diesel. while run dow the highway the engine loses power and then get it back. Will slow down up from 40 to 2 before the turbo come back on line

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com