Mercury Montclair Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Control Arm Assembly Replacement Estimate for Mercury Montclair

Mercury Montclair Control Arm Assembly Replacement costs $258 on average.

CarServiceEstimateShop/Dealer Price
1966 Mercury MontclairV8-6.7LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$258.31Shop/Dealer Price$310.29 - $438.33
1967 Mercury MontclairV8-6.7LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$808.25Shop/Dealer Price$1002.73 - $1558.24
1966 Mercury MontclairV8-6.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$808.25Shop/Dealer Price$1002.73 - $1558.24
1960 Mercury MontclairV8-6.3LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$403.11Shop/Dealer Price$494.76 - $736.26
1966 Mercury MontclairV8-7.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$348.71Shop/Dealer Price$428.32 - $639.19
1967 Mercury MontclairV8-7.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$238.31Shop/Dealer Price$290.31 - $418.36
1968 Mercury MontclairV8-6.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$813.25Shop/Dealer Price$1007.60 - $1563.00
1967 Mercury MontclairV8-6.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$243.31Shop/Dealer Price$295.54 - $423.78
Show example Mercury Montclair Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Jose

25 years of experience
64 reviews
Jose
25 years of experience
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Oakland, California
Amazing work

David

10 years of experience
193 reviews
David
10 years of experience
Mercury Marauder V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Philadelphia, Pennsylvania
Does good work I have no complaints

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
Mercury Milan L4-2.3L - Control Arm Assembly Replacement (Front Lower Left) - Attleboro, Massachusetts
Jonathan was on time, very nice, knowledgeable, and went above and beyond to get my car fixed. He was out in wet crappy weather but kept a smile the whole time.

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Mercury Milan V6-3.0L - Control Arm Assembly Replacement (Front Upper Right, Front Lower Right) - Irving, Texas
Great to work with!! Showed up early and go right to it. Made sure to keep us informed of any changes to the services. Will definitely book him again.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercury Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P2017 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit High Bank1
P2017 code definition? Intake Manifold Runner Position Sensor/Switch Circuit High Bank1 What the P2017 code means The runner position sensor, also known...
How to Start a Prius
The The Toyota Prius was a game changer when it was first introduced back in 2000. As one of the first commercially successful hybrid vehicles, it eventually helped launch an entire hybrid industry. The hybrid engine was not the only...
How to Replace the Electronic Spark Control Module
The car ignition has an electronic spark control module that fails when the Check Engine Light illuminates or if the engine does not start.

Why does my car takes about 10 minutes to warn up everytime it sets for a couple of hours

The thermostat may be stuck partly open if it takes longer to warm up than it used to as long and the outside air temperature is not below freezing. If outside air is very cold than the engine would cool...

2005 Saturn Ion has a hard time starting, indles roughly and then dies.

Hi there. The ticking noise in this case most likely was coming from the cylinder heads (or the top of the engine) and the components inside that were not receiving enough lubricant (oil) as the engine runs. Most of the...

My dealer told me that I should replace the oil pump along with the timing belt

Hi There, There are a number of differences between the oil pump and the water pump, however the main difference is that the water pump pumps the coolant through the motor and is driven by the timing belt and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com