Mercury Montclair Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(76)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(76)

Brake Pad Replacement Estimate for Mercury Montclair

Mercury Montclair Brake Pad Replacement costs $174 on average.

CarServiceEstimateShop/Dealer Price
1960 Mercury MontclairV8-6.3LService typeBrake Pads - Front ReplacementEstimate$265.31Shop/Dealer Price$319.04 - $452.33
1964 Mercury MontclairV8-7.0LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1967 Mercury MontclairV8-6.7LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1968 Mercury MontclairV8-7.0LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.04 - $432.32
1966 Mercury MontclairV8-6.7LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.07 - $432.39
1966 Mercury MontclairV8-6.4LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1960 Mercury MontclairV8-6.3LService typeBrake Pads - Rear ReplacementEstimate$250.31Shop/Dealer Price$303.92 - $437.12
1968 Mercury MontclairV8-6.4LService typeBrake Pads - Rear ReplacementEstimate$250.31Shop/Dealer Price$304.29 - $437.78
Show example Mercury Montclair Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(76)

Rating Summary
74
2
0
0
0
74
2
0
0
0

Chris

11 years of experience
45 reviews
Chris
11 years of experience
Mercury Villager V6-3.3L - Brake Pads Replacement (Front, Rear) - Fishers, Indiana
Very friendly and honest. Work met our high standards!! Just book him; you won’t regret it.

Danny

11 years of experience
269 reviews
Danny
11 years of experience
Mercury Grand Marquis V8-4.6L - Brake Pads Replacement (Front, Rear) - Philadelphia, Pennsylvania
Danny was fantastic! He came, swapped the brakes and rotors for new ones, and even gave me recommendations of things that I should look at in the future. I would definitely recommend Danny to my coworkers, family, and friends. So far, the brakes haven't squeaked since they've been changed and I've never been happier.

Walter

46 years of experience
314 reviews
Walter
46 years of experience
Mercury Grand Marquis V8-4.6L - Brake Pads Replacement (Rear) - Tulsa, Oklahoma
Very courteous and knowledgeable knew what he was doing

Gerron

34 years of experience
185 reviews
Gerron
34 years of experience
Mercury Mariner V6-3.0L - Brake Pads Replacement (Front) - Hillsboro, Oregon
Right on time . He got right to work and did a great  job. Would use again on my next repair.

Excellent Rating

(76)

Rating Summary
74
2
0
0
0
74
2
0
0
0
Number of Mercury Brake Pads Replacement services completed
836+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Air Pump Check Valve
A bad air pump check valve may create exhaust fume odor, fail your car's emissions tests, and turn on the Check Engine Light.
P2671 OBD-II Trouble Code: Actuator Supply Voltage B Circuit High
P2671 means there is a fault in the B circuit actuator caused by any multitude of electrical issues or problems.
P3486 OBD-II Trouble Code: Cylinder 11 Exhaust Valve Control Performance
P3486 means there is a performance issue due to a problem in cylinder 11, likely due to a defective throttle position sensor or low oil level.

After braking hard, the car shuts off

Hello. It is very hard to diagnose and issue like this without knowing a large variety of other factors. If nothing is wrong with the vehicle at this point, I would not worry about taking in your car. If you...

Car is grinding after driving a distance but nothing wrong with brakes ?

Hi there. It sounds like it could either axle or wheel bearing related. Low lubricant in either of these can create what your experiencing once heated up during use. A visual inspection of the axle boots may help in identifying...

Why would my steering only be stiff when driving but be fine when I'm still or going real slow 2001 Nissan Frontier

The steering system is designed to have a hard steering at high speeds to prevent any rollovers. The Dynamic Stability Control or Traction Control is designed to keep the vehicle from over steering when driven at a higher speed. You...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com