Mercury Meteor Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercury Meteor Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1962 Mercury MeteorV8-6.4LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1963 Mercury MeteorV8-4.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1963 Mercury MeteorL6-2.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1961 Mercury MeteorV8-4.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1963 Mercury MeteorV8-6.4LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1962 Mercury MeteorV8-5.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1962 Mercury MeteorV8-4.3LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1961 Mercury MeteorL6-3.7LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Mercury Meteor Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0

AL

12 years of experience
234 reviews
AL
12 years of experience
Mercury Meteor V8-3.6L - Car is not starting - Cocoa Beach, Florida
Great job, AL, right on time, perfect assessment, I will definitely use again!

Collins

12 years of experience
488 reviews
Collins
12 years of experience
Mercury Grand Marquis V8-4.6L - Battery - Atlanta, Georgia
Collins is auto knowledgeable ,personable and courteous. He did oil change,replaced filter ,installed new battery.and made a thorough inspection of my 16 year old Mercury Marquis very well . Collins knows what he is doing. He did get here somewhat late though but not too late.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercury Milan V6-3.0L - Battery - Dana Point, California
Fast and efficient! Arrived early. Great service!

Jose

15 years of experience
249 reviews
Jose
15 years of experience
Mercury Sable V6-3.0L - Battery - Oldsmar, Florida
Joses was really helpful and very professional will definitely refer to friends

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0
Number of Mercury Car Battery Replacement services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Starter
Common signs include the engine not turning over, starter engaging but not spinning the motor, and grinding noises or smoke when starting the motor.
P2118 OBD-II Trouble Code: Throttle Actuator Control Motor Current Range/Performance
P2118 code definition The P2118 code is a general OBD-II diagnostic trouble code (DTC) that is referencing the throttle actuator control motor...
How is Car Performance Defined?
There There are a lot of us who want a little red Corvette in our lives. It’s fast, handles well, and let’s face it, a high performance car makes you look good on an open and windy road. You might...

Car will not shift into fourth gear - 1991 Mercedes-Benz 300SE

Hello. I would check the condition of the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) first as well as the level. If the fluid is old or low then this will occur. If the fluid smells burnt or has debris in it then the...

Am using Honda Accord and my TCS is always on when s on the movement of the car is very slow why

Hi there: It's common for the traction control module (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-the-tcs-light-on) to develop electrical problems after it's been in use for more than 5 years. This is most likely the source of your Honda Accord's driving issues. In most cases, it's...

How do I adjust my 2015 Equinox steering wheel? My leg touches it every time I want to put leg on brakes. I believe I have in high

Hi there. Your steering wheel adjusts so that it can be in the ideal position for you while driving. Adjusting the steering wheel only takes a few seconds: 1. Locate the steering wheel lever, which is to the left of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com