Mercury Lynx Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Mercury Lynx Wheel Bearings Replacement is $119 with $15 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Mercury LynxL4-1.6L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$313.63Shop/Dealer Price$371.42 - $520.02
1986 Mercury LynxL4-2.0L DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$133.95Shop/Dealer Price$152.34 - $182.70
1985 Mercury LynxL4-1.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$133.71Shop/Dealer Price$152.03 - $182.21
1981 Mercury LynxL4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$291.63Shop/Dealer Price$349.41 - $498.01
1982 Mercury LynxL4-1.6LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$291.63Shop/Dealer Price$349.45 - $498.08
1987 Mercury LynxL4-1.9LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$133.71Shop/Dealer Price$152.03 - $182.21
1985 Mercury LynxL4-1.9LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$139.21Shop/Dealer Price$157.38 - $187.45
1981 Mercury LynxL4-1.6LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$297.13Shop/Dealer Price$355.19 - $504.01
Show example Mercury Lynx Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mercury Mountaineer V8-4.6L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Glendale, Arizona
Peter was extremely professional and friendly and I was extremely satisfied with his service and I would 100% recommend him for a raise

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Mercury Cougar V6-2.5L - Wheel Bearings Replacement (Passenger Side Front) - Austin, Texas
Very professional, punctual & gave honest feedback and what needed to be fixed.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Mercury Sable V6-3.0L - Wheel Bearings Replacement (Driver Side Front) - Sugar Land, Texas
Joseph did a great job with my vehicle and I will definitely use him again in the future.

Douglas

27 years of experience
52 reviews
Douglas
27 years of experience
Mercury Grand Marquis V8-4.6L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Houston, Texas
Very knowledgeable. Very thorough. Explained everything very clearly, and pointed out things that I need to consider getting done...issues that could become problems if I didn't get them addressed.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Mercury Wheel Bearings Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're a Personal Assistant
As As a personal assistant, you have a lot of demands placed on your time. Often it’s important that you be able to get around town quickly, running a ton of errands, picking things up here, dropping them off there,...
How Long Does a Window Motor / Regulator Assembly Last?
There There are a number of different perks that come with modern cars that most people will fail to appreciate. Most people have never had to roll a window down with a crank handle due to the fact that most...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Wisconsin
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Wisconsin through the Universal Technical Institute.

Temperature spiking up after I changed my thermostat trying to get my heater to work.

The heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core (https://www.yourmechanic.com/services/heater-is-not-working-inspection). As you know, the heater...

Shop says tie rods, wheel bearings and motor mounts are going bad on a used Bonneville-salesman says not true because no noise

Based on data from the Kelly Blue Book database of used car transactions, if the car were in good condition (which it isn't , obviously), it's worth about $2,000. Given the number, and extent, of required repairs, $2,000 would be...

2005 Dodge Caravan what I’m doing about 60 to 70 slightly jerks

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com