Mercury Lynx Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercury Lynx Control Arm Assembly Replacement is $149 with $54 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1982 Mercury LynxL4-1.6LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$273.31Shop/Dealer Price$322.89 - $449.13
1985 Mercury LynxL4-1.9LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$823.25Shop/Dealer Price$1015.33 - $1569.04
1986 Mercury LynxL4-2.0L DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$823.25Shop/Dealer Price$1015.33 - $1569.04
1985 Mercury LynxL4-1.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$363.71Shop/Dealer Price$440.89 - $649.92
1982 Mercury LynxL4-1.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$823.25Shop/Dealer Price$1015.35 - $1569.07
1986 Mercury LynxL4-1.9LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$321.47Shop/Dealer Price$388.11 - $565.48
1986 Mercury LynxL4-1.9LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$368.71Shop/Dealer Price$445.77 - $654.72
1985 Mercury LynxL4-2.0L DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$208.85Shop/Dealer Price$246.32 - $335.66
Show example Mercury Lynx Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Jose

25 years of experience
64 reviews
Jose
25 years of experience
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Oakland, California
Amazing work

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
Mercury Milan L4-2.3L - Control Arm Assembly Replacement (Front Lower Left) - Attleboro, Massachusetts
Jonathan was on time, very nice, knowledgeable, and went above and beyond to get my car fixed. He was out in wet crappy weather but kept a smile the whole time.

Michael

27 years of experience
95 reviews
Michael
27 years of experience
Mercury Mountaineer V6-4.0L - Control Arm Assembly Replacement (Front Upper Left) - Houston, Texas
At first I was nervous about using a mechanic service that you find online and where they come to you home. I have nothing but glowing reviews about Your Mechanic and my mechanic Michael Little. He arrived on time, was friendly, knowledgeable and professional. The work was done impeccably and the customer service from him and the website was perfect. I will be using the service, and if possible Michael for any future car repairs. In the future I will also be recommending the service to others in need of car repair. Thank you!

Dennis

6 years of experience
19 reviews
Dennis
6 years of experience
Mercury Grand Marquis V8-4.6L - Control Arm Assembly Replacement (Front Upper Left) - Los Angeles, California
Dennis was very professional went above and beyond to do a great job

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercury Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Turn Signal Bulb
A A turn signal is one of those things on your vehicle that you don’t often pay much mind to, but it’s a very important safety feature. Without this turn signal, how would people know which way you are planning...
How to Insure a Car With Modifications
There There are a lot of reasons why vehicle owners may make customizations (https://www.yourmechanic.com/article/how-to-customize-a-car) to a car, from getting a custom paint job to reflect a favored color to making internal tweaks to satisfy a need for speed. While cosmetic...
B1289 OBD-II Trouble Code: Servo Motor Potentiometer Air Intake Right Circuit Open
B1289 means there is an error with the servo motor potentiometer air intake right circuit, likely due to a defective servo motor or potentiometer.

Bouncy suspension, bottoms out, is it broken?

A certified mechanic, such as one from YourMechanic, needs to examine your suspension system (https://www.yourmechanic.com/book/?mktg_jid=358) to identify any shocks that are leaking. It sounds like your shocks are losing hydraulic pressure which accounts for the excessive bounce over hard bumps....

green security light doesn't come on all the time

As you know, your car is equipped with an anti-theft system that is operated by sensors typically on the doors that allow the anti theft system to be set when the doors are shut. When you shut your car door...

Something is draining the battery

Even though you did disconnect the battery, thus preventing any "external" current flow overnight, you still should check for parasitic current draw from the vehicle's electrical system, that is a current flow of (roughly) 50 or more milliamps when the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com