Mercury Lynx Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercury Lynx Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1981 Mercury LynxL4-1.6LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1984 Mercury LynxL4-2.0L DieselService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1984 Mercury LynxL4-1.6L TurboService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1985 Mercury LynxL4-1.6LService typeCar Battery ReplacementEstimate$421.31Shop/Dealer Price$512.89 - $765.12
1986 Mercury LynxL4-2.0L DieselService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1985 Mercury LynxL4-2.0L DieselService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1986 Mercury LynxL4-1.9LService typeCar Battery ReplacementEstimate$426.31Shop/Dealer Price$517.77 - $769.92
1987 Mercury LynxL4-1.9LService typeCar Battery ReplacementEstimate$426.31Shop/Dealer Price$518.14 - $770.58
Show example Mercury Lynx Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0

Robert

22 years of experience
279 reviews
Robert
22 years of experience
Mercury Mountaineer V6-4.0L - Battery - Roanoke, Texas
Friendly, knowledgeable, professional. Spoils highly recommend him!

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Mercury Mountaineer V6-4.0L - Battery - San Jose, California
Robert has excellent communication skills and diagnosed the problem quickly. Very courteous.

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Mercury Sable V6-3.0L - Battery - Denver, Colorado
A very nice man I did not have to make another appointment he got it done all at once so pleased I will ask for Robert again

Joe

20 years of experience
126 reviews
Joe
20 years of experience
Mercury Mariner V6-3.0L - Car Battery Replacement - Chicago, Illinois
Easy and convenient

Excellent Rating

(50)

Rating Summary
49
1
0
0
0
49
1
0
0
0
Number of Mercury Car Battery Replacement services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

2012 Honda Pilot vs. 2012 Acura RDX: Which One Should I Buy?
Sport utility vehicles are fun in the sun, sand, dirt, mud, and even in the carpool line at school. Whether you’re hauling around your family or your family of pets, these SUVs are sure to make even a drive around...
Is it Safe to Drive With a Worn Wheel Bearing?
A wheel bearing is a set of steel balls held together by a steel ring. The job of the wheel bearing is to...
Symptoms of a Bad or Failing Trunk Latch
Common signs include the trunk not shutting or locking and the trunk getting stuck closed.

Vent hose broke off of battery

The vents are so you will not get battery fumes built up inside the passenger compartment. Hydrogen gas may build up inside the car and can cause a fire hazard. I would not recommend driving it till you fix the...

My key won't go inside the ignition

Hello there. What you're describing is typically an indicator of a broken ignition lock cylinder (https://www.yourmechanic.com/article/how-to-replace-an-ignition-lock-cylinder-by-timothy-charlet). The ignition lock cylinder is located inside the assembly or lock body that is often welded onto the steering column. Most of the time,...

Both my engine power reduced and stability track light came on.

Hi There, The Stability Track light relates to the vehicles traction control system. When the computer detects an issue with this system, it will often times put the vehicle into a reduced power phase in an effort to prevent further...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com