Mercury Cyclone Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Control Arm Assembly Replacement Estimate for Mercury Cyclone

Mercury Cyclone Control Arm Assembly Replacement costs $278 on average.

CarServiceEstimateShop/Dealer Price
1971 Mercury CycloneV8-5.8LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$326.47Shop/Dealer Price$395.49 - $574.65
1971 Mercury CycloneV8-7.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$306.47Shop/Dealer Price$375.51 - $554.68
1970 Mercury CycloneV8-6.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$306.47Shop/Dealer Price$375.51 - $554.68
1970 Mercury CycloneV8-6.4LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$348.71Shop/Dealer Price$428.29 - $639.12
1966 Mercury CycloneV8-6.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$306.47Shop/Dealer Price$375.52 - $554.71
1964 Mercury CycloneV8-7.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$387.11Shop/Dealer Price$476.31 - $715.96
1964 Mercury CycloneL6-3.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$311.47Shop/Dealer Price$380.37 - $559.44
1969 Mercury CycloneV8-7.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$353.71Shop/Dealer Price$433.54 - $644.58
Show example Mercury Cyclone Control Arm Assembly Replacement prices

Control Arm Assembly Replacement Service

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Matthew

33 years of experience
1164 reviews
Matthew
33 years of experience
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Hampton, Virginia
Awesome service, quick and clean even after the repair. I will definitely ask my next service to him.

David

11 years of experience
225 reviews
David
11 years of experience
Mercury Grand Marquis V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Kansas City, Missouri
Other than being late, David was great!

Dennis

6 years of experience
19 reviews
Dennis
6 years of experience
Mercury Grand Marquis V8-4.6L - Control Arm Assembly Replacement (Front Upper Left) - Los Angeles, California
Dennis was very professional went above and beyond to do a great job

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
Mercury Milan L4-2.3L - Control Arm Assembly Replacement (Front Lower Left) - Attleboro, Massachusetts
Jonathan was on time, very nice, knowledgeable, and went above and beyond to get my car fixed. He was out in wet crappy weather but kept a smile the whole time.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercury Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Dodge Caliber
If If you’re looking for a compact car that offers a bit more space with acceptable fuel economy, the 2012 Dodge Caliber is a worthy target. The hatchback design is versatile, while the cooling storage compartment, removable flashlight (rechargeable) and...
Plymouth Certified Pre-Owned (CPO) Car Program
Many Many drivers who are in the market for a used Plymouth vehicle want to consider a Certified Pre-Owned, or CPO, vehicle. CPO programs allow owners of used cars to drive with confidence, knowing that their vehicle has been inspected...
How Car Colors Affect Car Insurance Rates
Car paint color doesn’t affect the cost of car insurance or how often car owners are pulled over by the police.

can you replace the 700r4 with the turbo 400?

The turbo 400 was used on a lot of trucks with the 5.7 engine and should be bolted up if it came out of an engine with a 5.7 or 5.0 engine. As far as the drive shaft and length...

What can cause engine not to crank

Hi, thanks for writing in. This can happen for many reasons such as over torquing the plugs when tightening them, or previously stripped threads in the cylinder. In either case, the result is the plug will result in being blown...

My 2001 ford F350 triton V10's engine began cranking in the middle of the night.

The issue is with your ignition switch. The switch is turning on the starting circuit to the starter and not disengaging the circuit unless you turn off the key. I recommend replacing the ignition switch. If you need further assistance...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com