Mercedes-Benz Sprinter 3500XD Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(388)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(388)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercedes-Benz Sprinter 3500XD Car Battery Replacement is $357 with $263 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz Sprinter 3500XDV6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$639.99Shop/Dealer Price$781.24 - $1182.49
2019 Mercedes-Benz Sprinter 3500XDV6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$619.99Shop/Dealer Price$761.26 - $1162.52
2021 Mercedes-Benz Sprinter 3500XDV6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$619.99Shop/Dealer Price$761.26 - $1162.52
2018 Mercedes-Benz Sprinter 3500XDV6-3.0L Turbo DieselService typeCar Battery ReplacementEstimate$619.99Shop/Dealer Price$761.24 - $1162.48
Show example Mercedes-Benz Sprinter 3500XD Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(388)

Rating Summary
374
9
1
1
3
374
9
1
1
3

Rafael

27 years of experience
74 reviews
Rafael
27 years of experience
Mercedes-Benz CLK350 V6-3.5L - Battery - San Francisco, California
Very professional. Candid, trustworthy, and high quality technician

Quentin

22 years of experience
213 reviews
Quentin
22 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Car Battery Replacement - Katy, Texas
Very good ..

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Battery - Allen, Texas
On time, very professional and knowledgeable and provides insight on what he's doing while he works.

Bryan

5 years of experience
64 reviews
Bryan
5 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Battery - Torrance, California
Very good

Excellent Rating

(388)

Rating Summary
374
9
1
1
3
374
9
1
1
3
Number of Mercedes-Benz Car Battery Replacement services completed
4268+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Fog Light Relay
Common signs include a clicking sound from the relay and the fog lights either not turning on or not switching off.
P0156 OBD-II Trouble Code: 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0156 P0156 trouble code definition Oxygen Sensor Circuit Malfunction (Bank 2 Sensor 2) What the P0156 code means The purpose of the oxygen sensor is to monitor the amount of oxygen present in the exhaust and relay this information to...
How to Replace an AC Pressure Switch
The AC pressure switch protects the AC system from pressure that's too high or low. Common signs of failure include a bad compressor or lack of AC.

How do i remove a frozen sway bar link bolt?

The options depend on what you have for tools, your skills, and how much bolt you have left exposed to grab onto. Choices include: penetrating oil, heating it with a torch, rattling it with an air hammer, drilling it with...

P0008 error code is shown

The P0008 code (https://www.yourmechanic.com/article/p0008-obd-ii-trouble-code-engine-positions-system-performance-bank-1-by-paul-lancette) you are receiving is telling you the camshafts and the crankshaft are reading that they are out of sync. The computer will run tests on the alignment of the camshafts to each other, and with the...

If passenger airbag is missing, shouldnt a light be going off in the car to indicate it isnt there?

Some vehicles were designed to have an option to not have a passenger airbag. That maybe the possibility why there is no airbag. If you were to dig around in the dashboard and find wires tied together, then someone removed...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com