Mercedes-Benz SLK280 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz SLK280 Power Steering Pump Replacement is $690 with $491 for parts and $199 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz SLK280V6-3.0LService typePower Steering Pump ReplacementEstimate$1392.74Shop/Dealer Price$1717.31 - $2608.32
2007 Mercedes-Benz SLK280V6-3.0LService typePower Steering Pump ReplacementEstimate$1350.74Shop/Dealer Price$1675.37 - $2566.43
2008 Mercedes-Benz SLK280V6-3.0LService typePower Steering Pump ReplacementEstimate$1181.20Shop/Dealer Price$1463.44 - $2227.34
Show example Mercedes-Benz SLK280 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1

Joe

43 years of experience
821 reviews
Joe
43 years of experience
Mercedes-Benz SLK280 V6-3.0L - Brake System Flush - Clearwater, Florida
Joe is very knowledgeable about Mercedes-Benz cars. I will definitely request Joe for all my car servicing needs.

Kevin

6 years of experience
92 reviews
Kevin
6 years of experience
Mercedes-Benz SLK280 V6-3.0L - Alternator - Kissimmee, Florida
He knows his work. I Will recommended to People need his work.

Carlos

28 years of experience
501 reviews
Carlos
28 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery - Irvine, California
Great

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercedes-Benz SLK280 V6-3.0L - Oil/Fluid Leak - Irvine, California
Really great service

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1
Number of Mercedes-Benz SLK280 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Register a Car in Iowa
Moving Moving to a new area can be a bit of a stressful situation due to the wide variety of things that have to be handled when attempting to get settled in. For new residents to the state of Iowa,...
How to Add Brake Fluid to Your Car
Car brake fluid is necessary to keep your car brakes working properly. Check brake fluid condition and top it off if it's low or discolored.
P0316 OBD-II Trouble Code: Misfire Detected on Startup (First 1000 Revolutions)
P0316 means the engine is misfiring due to damaged or defective ignition system components or engine vacuum leaks.

What types of lockout protection are offered?

Locking up your car is vital for security, but what if you lock your keys in the car? We’ve all done it (or come very close). Thankfully, your car offers some important forms of lockout protection to help ensure you...

My power steering light is on. How much to fix it

Hi Mavis. Thanks for writing in today. When the power steering light is illuminated, it can be caused by multiple component failures, ranging from a faulty or loose sensor, to electrical or mechanical failures including a damaged power steering pump,...

My 2017 Kia Optima keeps saying check hybrid system and won’t start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com