Mercedes-Benz SL600 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz SL600 Power Steering Pressure Hose Replacement is $365 with $260 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz SL600V12-6.0LService typePower Steering Pressure Hose ReplacementEstimate$799.33Shop/Dealer Price$986.79 - $1505.86
2004 Mercedes-Benz SL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1237.77Shop/Dealer Price$1513.03 - $2121.85
1998 Mercedes-Benz SL600V12-6.0LService typePower Steering Pressure Hose ReplacementEstimate$777.33Shop/Dealer Price$964.82 - $1483.92
2007 Mercedes-Benz SL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1298.25Shop/Dealer Price$1588.40 - $2242.40
2000 Mercedes-Benz SL600V12-6.0LService typePower Steering Pressure Hose ReplacementEstimate$766.81Shop/Dealer Price$951.70 - $1462.93
2005 Mercedes-Benz SL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1237.77Shop/Dealer Price$1513.01 - $2121.82
1997 Mercedes-Benz SL600V12-6.0LService typePower Steering Pressure Hose ReplacementEstimate$782.83Shop/Dealer Price$970.06 - $1488.96
2011 Mercedes-Benz SL600V12-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1292.69Shop/Dealer Price$1577.07 - $2208.15
Show example Mercedes-Benz SL600 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Richard

21 years of experience
461 reviews
Richard
21 years of experience
Mercedes-Benz SL600 V12-6.0L - Car is not starting - Marietta, Georgia
Fast honest knew what he needed

Edwin

40 years of experience
36 reviews
Edwin
40 years of experience
Mercedes-Benz SL600 V12-5.5L Turbo - Car does not shift from park to drive - Mount Pleasant, South Carolina
Great

Steven

14 years of experience
425 reviews
Steven
14 years of experience
Mercedes-Benz SL600 V12-6.0L - Loud screeching noise when I start the car - Goodyear, Arizona
I have an older Mercedes 600SL and was somewhat concerned about using some one other than a dealer, but my fears were put to rest after my initial conversation with Steve. Steve was on time, knowledgeable, had all of the required tools. diagnose the problem and gave me a stalemate of cost for the repair. He did not try to over sale me on something I didn't need. He made the repairs made sure that everything was correct and assured me that if I needed anything more he was just a phone call awaly. Steve called me the next day just to check that the repair was good.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercedes-Benz SL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Huntington Beach, California
Highly recommend Chris and will request him next time I need service on my Mercedes SL600 V12 Turbo Roadster! Chris is an expert craftsman who really knows about my Mercedes. I was happy about saving money by not going to the dealer for service. Who knew you can have your car serviced at home while getting things done around the house instead of wasting time driving to a dealer and hanging out in their waiting area! I will definitely request Chris next time my car needs service!!

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Mercedes-Benz SL600 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Rules of the Road For Louisiana Drivers
Driving Driving on the road requires you to know a lot of laws in order to drive safely and legally. While there are many laws that are based on common sense and that are the same from state to state,...
How to Get a Loan When Buying an RV
It’s no coincidence that the “R” in RV stands for “Recreation.” After all, Recreation Vehicles can be a lot of fun to own and provide a lot of freedom, luxury, and relaxation to many people. An RV can be its...
P2298 OBD-II Trouble Code: O2 Sensor Out of Range During Deceleration Bank 2 Sensor 1
P2298 means there is a voltage problem with the 02 sensor. Most of the time it's due to the oxygen sensor. Some causes may be vacuum or exhaust leak.

Car won't start

This may be related to many different possibilities, some of which may be related to a lack of spark and some of which may be related to a fuel delivery problem or a combination of both. For example, if the...

Just replaced my battery light still on, (Mazda 2002) I think they gave me a battery for a 2003 model, could that be the problem

Hello sir I have a lexus Ls400 I am changing the abs brake module and I am simply unsure what steps are necessary to release the pressure in the brake lines

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com