Mercedes-Benz SL400 Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,558)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,558)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Mercedes-Benz SL400 Car shuts off when stepping on gas pedal Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz SL400V6-3.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Mercedes-Benz SL400V6-3.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz SL400 Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117

David

10 years of experience
170 reviews
David
10 years of experience
Mercedes-Benz SL400 V6-3.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
Pre-Purchase service - On time with appointment. Follow up call and report was generated immediately which is greatly appreciate. Many thanks!!

Chris

15 years of experience
112 reviews
Chris
15 years of experience
Mercedes-Benz ML500 V8-5.0L - Car shuts off when stepping on gas pedal - Zephyrhills, Florida
Chris is great! He knows what he’s doing.

Ross

18 years of experience
54 reviews
Ross
18 years of experience
Mercedes-Benz ML430 V8-4.3L - Brake System Flush - Santa Rosa, California
Ross was awesome! Called me from his cell to confirm appointment the night before. Showed up on time, even though I live deep in the woods. He showed me how to flush my brake lines, talked to me about other problems my car might have but without up-selling me on the work to be done. He performed a 1 hour job in 35 minutes, and he did it well. I have a notoriously difficult Mercedes model. Ross knew his way around it. MUCH better service than I have had at even Master Mechanics. I saved his number and WILL be booking him again. Also, I will be recommending to friends.

Rusty

23 years of experience
514 reviews
Rusty
23 years of experience
Mercedes-Benz GLK350 V6-3.5L - AC Compressor - Arlington, Texas
Rusty completely changed out my a/c compressor and condenser, a difficult and time consuming job. Once again he accomplished the task expertly, efficiently and expeditiously. It now works better than new. I would highly recommend him to anyone for any automotive mechanical work.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117
Number of Mercedes-Benz services completed
61138+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2285 OBD-II Trouble Code: Injector Control Press Sensor Circuit Low
P2285 P2285 code definition Injector Control Press Sensor Circuit Low What the P2285 code means P2285 is an OBD-II generic code for the engine control module (ECM) detecting the injector control pressure (ICP) sensor is low and below specified sensor...
How to Take Off Water Spots on Your Car
Difficult Difficult to remove once dry, water can leave unsightly spots on a vehicle's exterior. There are a couple of options to remove these spots, however, including using white vinegar or a hydrochloric/hydrofluoric acid mix after washing your vehicle. Regardless...
P2048 OBD-II Trouble Code: Reductant Injector Circuit Low Bank 1 Unit 1
P2048 means there is a low circuit in the reductant injector circuit in the exhaust system.

Windshield wipers and horn not working

Hello. The first thing to check is all the fuses. If all the fuse are good, a scanner needs to be connected to car to check for code and data. Everything in the column and steering wheel goes through the...

My car's engine intermittently stalls

Hello. If the engine is just shutting off then it may be an electrical issue with the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) or the main relay (https://www.yourmechanic.com/services/main-relay-computer-fuel-system-replacement). If the engine starts sputtering before it turns off and then it starts up again...

Hi my car won't start, the brake has gone super stiff and the odometer is like maxed

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com