Mercedes-Benz S320 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Mercedes-Benz S320 Mass Airflow Sensor Replacement is $333 with $238 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$727.29Shop/Dealer Price$897.87 - $1370.22
1996 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$571.07Shop/Dealer Price$707.62 - $1077.83
1995 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$571.07Shop/Dealer Price$707.62 - $1077.83
1997 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$707.29Shop/Dealer Price$877.86 - $1350.20
1994 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$571.07Shop/Dealer Price$707.65 - $1077.88
1998 Mercedes-Benz S320L6-3.2LService typeMass Airflow Sensor ReplacementEstimate$707.29Shop/Dealer Price$877.90 - $1350.27
Show example Mercedes-Benz S320 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(20)

Rating Summary
18
0
0
2
0
18
0
0
2
0

Attila

19 years of experience
917 reviews
Attila
19 years of experience
Mercedes-Benz S320 L6-3.2L - Heater Blower Motor - Florham Park, New Jersey
Attila is a great mechanic, he constantly keeps the customer in loop once he arrives till he is finished with the job. Very friendly person & I highly recommend him

Amor

43 years of experience
181 reviews
Amor
43 years of experience
Mercedes-Benz S320 L6-3.2L - Heater Blower Motor Resistor - Tracy, California

Noni

22 years of experience
19 reviews
Noni
22 years of experience
Mercedes-Benz S320 L6-3.2L - Car is overheating - Forest Hills, New York
From all my experiences with mechanics, Nonis transparency is unmatched. He patiently diagnosed the vehicle and found the direct issue. I would definitely use his services in the future.

John

27 years of experience
1019 reviews
John
27 years of experience
Mercedes-Benz S320 L6-3.2L - Car is not starting - La Marque, Texas
John was an awesome technician. He was very professional, thorough, and prepared. It was impressive to see him work diligently and explain, in detail, what was wrong with my vehicle. Make sure you book John when using this service; I promise you, you'll be glad you did!

Excellent Rating

(20)

Rating Summary
18
0
0
2
0
18
0
0
2
0
Number of Mercedes-Benz S320 services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....
How to Replace a Fuel Rail Sensor
The fuel system has a fuel rail sensor which fails when the engine operates erratically, has difficulty starting, or the Check Engine Light comes on.

I have a p0016 code - crankshaft position sensor on FJ Cruiser 2007, how do I replace it

The crankshaft position sensor is located down on the right side (if you are standing facing the engine from the front of the vehicle) of the motor just to the right of the crankshaft pulley. To remove this, disconnect the...

Stalling, cutting out, dieing while driving

This is a common symptom of a failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or faulty throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). The mass air flow sensor regulates the air flow into the intake system as it is mixed with fuel prior to...

Replaced part after check engine light was diagnosed, but the check engine light came back on after a few days.

Hi there. The code P0010 (https://www.yourmechanic.com/article/p0010-obd-ii-trouble-code-a-camshaft-position-actuator-circuit-bank-1-by-paul-lancette) is in reference of the Camshaft Position Sensor on your engine. Check the harness to the sensor and see if its hooked up properly. Then check the sensor for resistance as the engine is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com