Mercedes-Benz R320 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Mercedes-Benz R320 Brake Vacuum Pump Replacement is $535 with $431 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz R320V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$987.51Shop/Dealer Price$1222.02 - $1882.22
2007 Mercedes-Benz R320V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$965.51Shop/Dealer Price$1200.05 - $1860.28
2009 Mercedes-Benz R320V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$965.51Shop/Dealer Price$1200.05 - $1860.28
Show example Mercedes-Benz R320 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0

Ben

41 years of experience
1426 reviews
Ben
41 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Oil Change - Katy, Texas

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Exhaust Gas Recirculation (EGR) Tube - Marietta, Georgia
Tung worked hard and got the job done! Highly recommended.

Chris

16 years of experience
331 reviews
Chris
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Spring Valley, California
Friendly

Arturo

12 years of experience
78 reviews
Arturo
12 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Brake Vacuum Pump - Davenport, Florida
Arturo was fantastic. He was on time, communicative, and extremely knowledgeable. Top class Auto Tech !

Excellent Rating

(1)

Rating Summary
1
0
0
0
0
1
0
0
0
0
Number of Mercedes-Benz Brake Vacuum Pump Replacement services completed
11+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Flexible Clutch Hose
Common signs include difficulty shifting, low clutch fluid, and feeling no resistance at the clutch pedal.
B1948 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Short To Ground
B1948 means there is a fault in the coolant temperature signal circuit, likely due to a problem with one of the electrical components.
How to Replace Fuel Injection Lines
Fuel injection lines transfer fuel from the fuel tank to the car engine. Now made of plastic, fuel lines don't rust and hold up to 750 psi.

How do you check the MyKey® status on my car?

Your car has the ability to track a lot of information about the MyKeys® that are programmed to work with it. Here’s what you need to know about the various system status messages. MyKey® Miles: This tells you the total...

Car overheats

It is great to see that you have been trying to tackle your Corvette's overheating concern head on. From the description provided it seems that a lot of components dealing with the cooling system were replaced. From that, I can...

Map lights does not turn on when doors are closed, but work when the door is open.

This is an electrical problem that is resolved using what is referred to as a "circuit trace". A circuit trace pinpoints the wiring (or component) fault that accounts for the misoperation. If you have the factory wiring diagram in hand,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com