Mercedes-Benz Maybach S580 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz Maybach S580 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mercedes-Benz Maybach S580V8-4.0L Turbo HybridService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Mercedes-Benz Maybach S580 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1

Dave

23 years of experience
303 reviews
Dave
23 years of experience
Mercedes-Benz 300SE L6-3.0L - Car is not getting enough power - San Jose, California
Dave has integrity which I highly value.

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz E350 V6-3.5L - Car is not getting enough power - Los Angeles, California
Kenneth was great! He arrived on time, listened to my description of the problem with the car; explained what he was doing as he used his diagnostics tools on my car, and went with me on a test drive to further investigate the problem. I will use him again and would happy to refer him to my friends and family.

Ralph

38 years of experience
187 reviews
Ralph
38 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Car is not getting enough power - Kent, Washington
Ralph was very knowledgeable and confident in his work. He was nice and professional. Ralph took the time to listen to both me and my vehicle. He didn't try to sell me a bunch of things I didn't need. I will be using Ralph again for mu future car needs.

Christopher

27 years of experience
358 reviews
Christopher
27 years of experience
Mercedes-Benz E550 V8-5.5L - AC is not working - Tampa, Florida
Professional.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1
Number of Mercedes-Benz Car is not getting enough power Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Exhaust Gas Recirculation (EGR) Valve
Common signs include engine performance issues like decreased power and acceleration, rough idle, and the Check Engine Light coming on.
P0440 OBD-II Trouble Code: Evaporative Emission Control System Malfunction
P0440 P0440 code definition Evaporative Emission Control System Malfunction What the P0440 code means P0440 is an OBD-II generic code that the engine control module (ECM) has detected a leak in the fuel tank vapor system or a vapor pressure...
P2250 OBD-II Trouble Code: O2 Sensor Ref Voltage Circuit High Bank 2 Sensor 1
P2250 means an issue with the upstream oxygen sensor voltage circuit in bank 2 due to a faulty sensor, fuel pressure, or engine or exhaust leaks.

Key stuck in ignition will not turn.

Hello. Thanks for writing in. The key will not come out (https://www.yourmechanic.com/services/ignition-key-is-stuck-and-does-not-turn-inspection) because the ignition cylinder is not in the off position. This is standard. The first thing to check is that the shift lever is in the park position....

Recently purchased a used Mazda 3. It sometimes doesn't start and not battery. Believe its the switch / contact in the shifting

There is a neutral start switch (https://www.yourmechanic.com/services/neutral-safety-switch-replacement) and other interlocks that could be at fault. On some Mazda's with this problem a reported fix involves the plastic shifter cable which can seize to the stud on the switch due to...

my car is an 04 honda accord 2.4 ivetec.. when i turn off the car and open the door the headlights and taillights flash on and off

Depending on the type of theft system you have and if it is factory installed will dictate the process to set the system light flash when theft system is activated. You may need to have the computer system program set...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com