Mercedes-Benz GLS450 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz GLS450 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Mercedes-Benz GLS450L6-3.0L Turbo HybridService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Mercedes-Benz GLS450V6-3.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Mercedes-Benz GLS450L6-3.0L Turbo HybridService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz GLS450V6-3.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2020 Mercedes-Benz GLS450L6-3.0L Turbo HybridService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Mercedes-Benz GLS450V6-3.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz GLS450 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Ramon

7 years of experience
117 reviews
Ramon
7 years of experience
Mercedes-Benz GLS450 L6-3.0L Turbo Hybrid - Oil Change - Burbank, California
Personable and did a nice job.

Christopher

20 years of experience
314 reviews
Christopher
20 years of experience
Mercedes-Benz GLS450 V6-3.0L Turbo - Initial Safety Inspection - Brandon, Florida
Chris did a great job, timely, professional, and knows what he's doing. Definitely would be using your services in the future. Thanks.

John

27 years of experience
1019 reviews
John
27 years of experience
Mercedes-Benz GLS450 V6-3.0L Turbo - 50 Point Inspection - Seabrook, Texas
JOHN WAS QUICK, WITTY AND VERY PROFESSIONAL OVER ALL.

Theodore

16 years of experience
1604 reviews
Theodore
16 years of experience
Mercedes-Benz GLS450 V6-3.0L Turbo - Brake Pads Replacement (Front, Rear) - Renton, Washington
Ive had Theodore come out multiple times to fix my cars. Each time has been excellent and would highly recommend him!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz GLS450 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Does Buying Good Quality Gas Matter?
Gasoline Gasoline is refined from crude oil and can contain impurities and minor inconsistencies. Because of this, it is standard practice for additives to be mixed into gas. This means that one person can fill up their car anywhere and...
The Guide to Legal Car Modifications in Utah
ARENA Creative / Shutterstock.com Whether you live in or plan to move to Utah and you have a modified vehicle, you need to make sure that it conforms to the laws throughout the state. The following information...
How to Get Smart Dealership Certified
Smart car dealerships offer automotive technician jobs to mechanics who are Smart certified through a Smart training program such as UTI.

Seat belt lock not working.

Hi. If your seat belt lock is not working, then that is something that should be repaired as soon as possible for safety reasons. The seat belt should lock when the belt is moved at a quick rate as a...

P1456 - Check engine minor EVAP Leak.. Not the Gas cap

If you smell gas, there can be a leak in a number of places. All the fuel lines should be carefully inspected to make sure they are secure and undamaged, all the way up to the fuel injectors themselves. Even...

Code p0158 keeps coming up

More often than not, the P0158 OBD-II trouble code (https://www.yourmechanic.com/article/p0158-obd-ii-trouble-code-02-sensor-circuit-high-voltage-bank-2-sensor-2-by-jamahl-walker) is caused by an exposed wire or short in the electrical connections to the O2 sensors as opposed to the sensor themselves. You might want to try replacing the electrical...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com