Mercedes-Benz GLC63 AMG Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(38)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(38)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercedes-Benz GLC63 AMG Water Pump Replacement is $430 with $269 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeWater Pump ReplacementEstimate$732.52Shop/Dealer Price$883.79 - $1299.32
Show example Mercedes-Benz GLC63 AMG Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(38)

Rating Summary
32
3
2
0
1
32
3
2
0
1

Glen

22 years of experience
35 reviews
Glen
22 years of experience
Mercedes-Benz C350 V6-3.5L - Water Pump - Las Vegas, Nevada
On time, straightforward, honest and very knowledgeable. Had my best interest in mind. Would highly recommend and will request him again.

Chris

22 years of experience
2198 reviews
Chris
22 years of experience
Mercedes-Benz E430 V8-4.3L - Water Pump - Costa Mesa, California
Very friendly and thorough, walked me through all I needed to know about the problems.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mercedes-Benz E55 AMG V8-5.5L Turbo - Water Pump - Peoria, Arizona
Peter Pryke did an excellent job! High marks all the way around for him. He was very professional and knowledgeable overall. He totally earned by trust and I will not hesitate to have him work on my E55 AMG again as needed.

Frank

40 years of experience
57 reviews
Frank
40 years of experience
Mercedes-Benz CLK430 V8-4.3L - Water Pump - Atlanta, Georgia
Frank was GREAT, right on time and called to let me know he was on his way. Would request Frank again in the future. Nice guy!

Excellent Rating

(38)

Rating Summary
32
3
2
0
1
32
3
2
0
1
Number of Mercedes-Benz Water Pump Replacement services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

How Long Does a Cooling Fan Resistor Last?
The The purpose of the cooling fan resistor is to remove heat from the engine’s coolant and from the A/C refrigerant. The resistor does this by drawing air through the radiator and air conditioning condenser. A belt drive fan is...
Veteran and Military Driver Laws and Benefits in Colorado
The The state of Colorado offers a variety of benefits for drivers who have either served in an Armed Forces branch in the past, or are current active military members. Vehicle registration benefits The state of Colorado provides military veterans...
P0595 OBD-II Trouble Code: Cruise Control Servo Control Circuit Low
P0595 means an issue with the cruise control servo control circuit which causes the cruise control on the vehicle to work poorly or not at all.

Car dies when gas pedal pressed

Your symptoms have many potential causes. When you press the accelerator, the engine is under load and sucking in more air. The engine control module (ECM) should respond by providing the engine with more fuel. If the vehicle hesitates or...

Tail light on after the car is off, brake lights won't work

Tail lights stay on when the car is off and your brake lights don't work at all. If lights are staying on when you turn the car off, the ignition switch turns power off to that spot. Maybe your ignition...

My car turns off when I go in reverse and make hard turns

You should have the computer scanned for any stored diagnostic codes for the engine idle or transmission that may be causing the stalling. When going into reverse the transmission is at highest pressures and loads on the engine. If idle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com