Mercedes-Benz GLC63 AMG Tie Rod End Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Tie Rod End Replacement Service

How much does a Tie Rod End Replacement cost?

On average, the cost for a Mercedes-Benz GLC63 AMG Tie Rod End Replacement is $253 with $158 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Rear Left Inner ReplacementEstimate$431.21Shop/Dealer Price$520.27 - $764.93
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Front Right Outer ReplacementEstimate$411.21Shop/Dealer Price$500.28 - $744.96
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Front Left Outer ReplacementEstimate$411.21Shop/Dealer Price$500.28 - $744.96
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Rear Left Outer ReplacementEstimate$411.21Shop/Dealer Price$500.26 - $744.92
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Front Right Inner ReplacementEstimate$411.21Shop/Dealer Price$500.30 - $744.99
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Rear Right Inner ReplacementEstimate$411.21Shop/Dealer Price$500.28 - $744.96
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Front Left Inner ReplacementEstimate$416.21Shop/Dealer Price$505.15 - $749.72
2018 Mercedes-Benz GLC63 AMGV8-4.0L TurboService typeTie Rod End - Rear Right Outer ReplacementEstimate$416.21Shop/Dealer Price$505.52 - $750.38
Show example Mercedes-Benz GLC63 AMG Tie Rod End Replacement prices

What are tie rod ends and how do they work?

Your car’s steering rack or gearbox (depending on the vehicle) is bolted in a fixed position to the frame of your vehicle. But the car’s wheels move up and down to smooth out road irregularities, and also left and right as you turn the steering wheel. The tie rod end is connected between the track rod of the steering assembly and the steering knuckle. A tie rod has a ball-and-socket joint to accommodate these movements. Cars will typically have two tie rod ends on each side: one inner tie rod end and one outer tie rod end — four total with a set of two per side. Tie rod ends are usually permanently greased but some may have Zerk fittings for re-greasing, including aftermarket ones. Tie rod ends are adjustable and accuracy is critical for proper front wheel alignment.

When to consider replacing tie rod ends:

  • Vehicle wandering, pulling, or premature tire wear out. Loose tie rod ends may cause the vehicle to not track straight ahead. You may also notice excessive tire wear on the front tires.
  • Missing, damaged, or leaking rubber boot or bellows. The grease in an outer tie rod end is retained by a rubber seal. If the seal has failed, the grease will leak out and the joint will be contaminated and worn down by road dirt. Inner tie rod ends are protected by extensible bellows. If the bellows has torn and is noticed early, only it needs to be replaced.
  • Obvious looseness in the component. Mechanics use specified tests to determine if there is wear in a tie rod end. For example, the resistance to turning of the ball stud in the outer tie rod end can be measured and compared against the original equipment manufacturer’s (OEM) specifications. However, without the use of any instruments, any detectable play in the ball stud indicates the tie rod end must be replaced. Excessive play will also make it impossible to properly set toe alignment.
  • Clunking noises, lack of smooth steering. Noise from the suspension on turning, or binding when you turn the steering wheel, could be due to tie rod end defects. Steering rack or power steering assist problems can account for these problems too.

How do mechanics replace tie rod ends?

  • The vehicle is jacked up and supported on steel safety stands.
  • The tire and wheel assembly is removed.
  • If possible, the existing tie rod end length is measured and recorded. Installing the new tie rod at the same length as the old helps in the alignment process.
  • The tie rod end adjusting lock nut or sleeve is loosened. Then, a tie end removal tool is used to separate the tie rod ball stud from the steering knuckle. The tie rod is then unthreaded from its connection to the inner tie rod end.
  • On a rack and pinion type steering system, if an inner tie rod end is being replaced, the tie rod steering shaft boot is removed and the tie rod unthreaded from the steering rack and the outer tie rod end.
  • New tie rod ends are installed with all fasteners and the adjusting lock nut tightened to the required OEM torque value. During installation, the length recorded during removal is applied to aid the later wheel alignment process.
  • With only a few exceptions, anytime a suspension component is removed and replaced on your car, the vehicle alignment must be inspected, measured, and adjusted to factory specifications. Using portable equipment, some mobile mechanics can perform a mobile alignment at your location. More likely though, the final step will be a trip to a local alignment shop for measurement, and adjustment as needed, of the vehicle alignment.

Is it safe to drive with a tie rod end problem?

No. Tie rods ends are a critical mechanical linkage in the steering system. If a known problem exists, such as wear, looseness, or binding, the possibility of sudden and unpredictable breakage of the tie rod remains, which would cause loss of steering control. Consequently, it is not safe to drive the car if the tie rod ends have a known deficiency. Tie rod ends should always be inspected per the maintenance schedule.

When replacing tie rods keep in mind:

  • It is recommended to replace tie rod ends in pairs. There are four tie rod ends on most vehicles. The outer tie rod ends — one per side — are most susceptible to wear and failure. If one outer tie rod end has failed, the other is probably not far behind.
  • After the repair is performed the vehicle must be aligned, either on a mobile basis or at a good alignment shop.
  • A good alignment job will provide you with pre and post-alignment printouts of your car’s alignment settings. A good shop will set the alignment to the “preferred” factory setting, not just the “allowed” settings. A job well-done will also have performed a careful inspection of the suspension beforehand to ensure the new alignment remains durable and stable. The best alignment results will be achieved if the tires on your car are not unevenly worn.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

David

5 years of experience
7 reviews
David
5 years of experience
Mercedes-Benz GLC63 AMG V8-4.0L Turbo - Pre-purchase Car Inspection - Sugar Land, Texas
David was selected by Your Mechanic to conduct a re-inspection after the initial inspection failed to disclose obvious cosmetic defects. David was thorough in both his inspection of the areas under concern, as well as re-inspecting the entire vehicle's condition in the event the first inspection failed to reveal less obvious defects. David confirmed the suspect cosmetic defects and I'm now working with Your Mechanic to resolve the disparity from the initial PPI conducted which should have disclosed such defects. As to David, he provided a thorough inspection, commentary via voice memos, and appropriate media for me to fully grasp the nature of the car - what should have occurred the first go around. I appreciate his professionalism and I look forward to resolving the disparity with Your Mechanic's customer response team. Things don't always go to plan, the true measure of a company's worth, credibility, and trust, is how they respond to customer's when things deviate from plan. I'm hopeful that Your Mechanic's leadership team will persevere and remedy this situation in a timely fashion. Thank you.

TJ

26 years of experience
362 reviews
TJ
26 years of experience
Mercedes-Benz E500 V8-5.0L - Tie Rod End Replacement (Front Left Inner, Front Right Inner, Front Left Outer, Front Right Outer) - Lehigh Acres, Florida
Timely and very professional. I would recommend him to anyone.

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Mercedes-Benz C230 L4-2.3L - Tie Rod End Replacement (Front Left Inner, Front Right Inner, Front Left Outer, Front Right Outer) - Washington, District of Columbia
He explained everything in a way that even I could understand.

Justin

4 years of experience
31 reviews
Justin
4 years of experience
Mercedes-Benz C320 V6-3.2L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Philadelphia, Pennsylvania
Great job, very pleased

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Mercedes-Benz Tie Rod End Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does My Gas Tank Know When It’s Full?
Anyone Anyone who has ever filled up a gas tank has experienced the tactile "clunk" the nozzle makes when the fuel tank is full. This sound comes from the nozzle right when the flow of fuel stops. Most people barely...
How to Buy a Good Quality Power Steering Hose
One One of the most overlooked components, and one that can be the most beneficial in keeping your power steering system in good working order, is the power steering hose. It allows the pressurized power steering rack to stabilize the...
P0142 OBD-II Trouble Code: O2 Sensor Circuit Malfunction (Bank 1, Sensor 3)
Diagnostic Diagnostic Trouble Code (DTC): P0142 P0142 code definition O2 Sensor Circuit Malfunction (Bank 1, Sensor 3) What the P0142 code means P0142 is the OBD-II generic code indicating the Engine Control Module (ECM) input from the O2 sensor circuit...

Power steering fluid leaks

The steering gear leaking is best serviced by replacing it with a new or remanufactured unit. The hoses should be checked also. I recommend you have a mechanic like one from YourMechanic inspect your vehicle for power steering leaks (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection)....

Clutch slave cylinder is most likely bad. Will refilling the brake fluid help?

Filling it might get you some drive time. It is definitely a long shot though. Although, long shots are often necessary to get vehicles where we need them to be for repairs. At the very least it is worth a...

How can I access the service history of my car?

Checking this vehicle's history (https://www.yourmechanic.com/article/how-to-check-car-history-by-cheryl-knight) could be a very difficult task since you are seeking information from another country. The previous owner may have kept receipts and records every time services were performed, but you will have to track down...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com