Mercedes-Benz GL320 Crankshaft Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Crankshaft Position Sensor Replacement Service

How much does a Crankshaft Position Sensor Replacement cost?

On average, the cost for a Mercedes-Benz GL320 Crankshaft Position Sensor Replacement is $162 with $67 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeCrankshaft Position Sensor ReplacementEstimate$271.59Shop/Dealer Price$325.99 - $441.94
2009 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeCrankshaft Position Sensor ReplacementEstimate$228.59Shop/Dealer Price$279.52 - $392.87
2008 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeCrankshaft Position Sensor ReplacementEstimate$247.59Shop/Dealer Price$302.02 - $418.00
Show example Mercedes-Benz GL320 Crankshaft Position Sensor Replacement prices

What is the Crankshaft Position Sensor all about?

Many newer cars have computerized engine management systems that rely on sensors to report data to the computer. The crankshaft position sensor is used in conjunction with the camshaft position sensor to control ignition timing and to let the computer know when to inject fuel and provide spark sequence. Due to the mounting locations of this sensor, it is common for heat and oil leaks to cause this sensor to fail.

Keep in mind:

  • Damage to the crankshaft position sensor is sometimes caused by leaking oil, which means there may be another component of your vehicle that needs replacement or repair.
  • The electrical connector can also be damaged, and should be inspected every time the position sensor is replaced.

How it's done:

  • Scan the car for trouble codes.
  • Remove and replace crankshaft position sensor.
  • Clear trouble codes.
  • Check for the proper operation of the car.

Our recommendation:

The crankshaft position sensor will usually let you know when it needs replacing. The Check Engine warning light will illuminate and you may notice that your vehicle has a hard time starting or running smoothly. When you notice any of these signs, schedule an inspection.

What common symptoms indicate you may need to replace the Crankshaft Position Sensor?

  • Car does not start.
  • Check engine light is on.
  • Car misfires (car runs rough).

How important is this service?

The crankshaft position sensor relays critical information to your vehicle’s computer management system. The sensor provides the management system with the information it needs to control ignition timing, and it lets the computer know when it needs to provide sparks and fuel. Without a functioning crankshaft position sensor, the computerized management system doesn’t receive this critical information, and the vehicle will either not start, or will misfire while you’re driving it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1
Number of Mercedes-Benz GL320 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Can a Bad Sensor Prevent a Car From Starting?
If your car isn't starting or has a hard time starting, a faulty sensor may be to blame. Car sensors monitor data to keep your car running smoothly.
Symptoms of a Bad or Failing Throttle Position Sensor
Common signs include lacking power when accelerating, rough or slow idle, stalling, inability to shift up, and the Check Engine Light coming on.
How to Replace an Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor
Exhaust gas recirculation (EGR) systems use a pressure feedback sensor to tell the powertrain control module (PCM) how much exhaust gas is flowing.

Overheating after replacing water pump, thermostat and coolant temp. Sensor

Hello. That hole in the water pump is there to let you know when the bearing in the water pump is failing. It starts leaking when the bearing is going out so that it will be replaced prior to a...

My steering has to move freely. What can be the issue? , 2008 Suzuki Swift

Hello - you don't mention a power interruption to the vehicle (such as changing the battery), but it sounds as though the battery may have been disconnected, and the steering angle sensor (part of the EPS system) needs to be...

Could this cause ur car to stall in warmer weather? My car never stalls during winter months. But from spring on its a neverendin

You should have the check engine light and engine scanned to see if the engine may be running lean due to low fuel pressures or clogged injectors. You should also have the mass airflow sensor cleaned and checked for proper...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com