Mercedes-Benz G550 4x4 Lubricate Ball Joints at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,600)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,600)

Lubricate Ball Joints Service

How much does a Lubricate Ball Joints cost?

On average, the cost for a Mercedes-Benz G550 4x4 Lubricate Ball Joints is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz G550 4x4V8-4.0L TurboService typeLubricate Ball JointsEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz G550 4x4V8-4.0L TurboService typeLubricate Ball JointsEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz G550 4x4 Lubricate Ball Joints prices

What is lubricating the ball joints all about?

Good suspension allows the wheels to move over bumps and potholes smoothly while making the car experience a very small amount of the jolt. In order for the wheels to move freely of the vehicle’s body, joints connect parts together while allowing them to move around. On parts that need to move in multiple directions at the same time, ball joints are the only solution.

Keep in mind:

  • To access the ball joint, wheels and brake components will usually have to be removed.
  • When lubricating the ball joint, the steering knuckle and other suspension components can be inspected for excess wear.
  • If a ball joint is covered in a rubber boot, the mechanic will make sure that the boot is still protecting the joint from dirt and debris.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The ball joints on the suspension system is located
  • The Zerk grease fittings on the ball joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

The ball joints should be lubricated when the manufacturer suggests. This information can usually be found in a vehicle’s manual. The lubricant may wear away prematurely if the joint is not properly protected. Servicing the ball joints usually requires the removal of the wheels and brakes. This allows access to other components that usually aren’t as easily serviceable. Other joints aside from the ball joint may need lubrication. Parts may be showing excess wear. The steering knuckle and control arm should be inspected as well. There are many kinds of suspension and steering components that a vehicle could have, so consult the vehicle’s manual for any model-specific repairs or services that may need to be done.

What are the common symptoms indicating you need to lubricate the ball joints?

  • Loud squeaking or groaning when the suspension moves or when steering
  • Steering or suspension seems to operate less smoothly

How important is this service?

This service is fairly important and affects crucial components in the vehicle. Proper lubrication of components is a staple of preventative maintenance. Ball joints have to be completely replaced when they become too worn, and wear happens much faster without proper lubrication.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,600)

Rating Summary
5,210
189
54
28
119
5,210
189
54
28
119

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Mercedes-Benz C350 V6-3.5L - Lubricate Ball Joints - Owings Mills, Maryland
.

Michael

21 years of experience
254 reviews
Michael
21 years of experience
Mercedes-Benz CLK350 V6-3.5L - Power Steering Pump - Fontana, California
Great mechanic. Attention to detail

Sam

17 years of experience
115 reviews
Sam
17 years of experience
Mercedes-Benz SLK280 V6-3.0L - Pre-purchase Car Inspection - Fresno, California
Awesome, Honest, Intelligent, and explains everything clear. Very happy to work with Sam, thank you!!

Richard

13 years of experience
601 reviews
Richard
13 years of experience
Mercedes-Benz E350 V6-3.5L - Crankshaft Position Sensor - Las Vegas, Nevada
Very knowledgeable, professional, and nice guy. He was on time for both appointments, and fixed the problem. Highly recommended. Karl

Excellent Rating

(5,600)

Rating Summary
5,210
189
54
28
119
5,210
189
54
28
119
Number of Mercedes-Benz services completed
61600+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Ignition Trigger Last?
In In order to crank a car, there are elements of the electrical and the fuel system that have to work together. As the car key is turned over, the ignition coil will have to let out a spark that...
P0476 OBD-II Trouble Code: Exhaust Pressure Control Valve Range/Performance
What What the P0476 code means During the exhaust back pressure step test, the engine control module (ECM) commands and measures a preprogrammed exhaust pressure and then measures time for pressure decay during your vehicle’s engine running test. The exhaust...
How to Replace an AC Line
AC hoses are failing if the air conditioning system is not blowing cold air or the air is leaking out of the AC lines.

My electrics are all going crazy

There are numerous Technical Service Bulletins (TSB #PIT-4730A, #TB-080849017B, #4011, #07224) that address this issue and probably a few that you haven’t seen yet. These issues have multiple causes, from defective wiring, shorted fuse panels and in some cases defective...

Check Transmission Light coming on

Hi. The "Check Transmission" light indicates that a fault code is present in the transmission computer. To correct this, the fault codes need to be read in order to determine the issue. Fault corrections could be as simple as a...

I put a brand new thermostat in my car and after that my heat went out and I noticed water on floorboard.. what causes this?

If you did not have an overheating problem prior to the repairs that you have listed, a likely cause of the present overheating is trapped air and/or low coolant level. Trapped air can prevent coolant circulation thus causing the no...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com