Mercedes-Benz G550 4x4 Brakes, Steering and Suspension Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(70)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(70)

Brakes, Steering and Suspension Inspection Service

How much does a Brakes, Steering and Suspension Inspection cost?

On average, the cost for a Mercedes-Benz G550 4x4 Brakes, Steering and Suspension Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz G550 4x4V8-4.0L TurboService typeBrakes, Steering and Suspension InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz G550 4x4V8-4.0L TurboService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz G550 4x4 Brakes, Steering and Suspension Inspection prices

The brakes, suspension, and steering systems are all major safety components of any vehicle. If something is going wrong with one of them it can seriously affect the performance and the safety of the car.

There can be simple issues such as worn brake pads, the wheels being out of alignment or leaking steering fluid to the more severe issues like a warped rotor, bad tie rods or failing struts.

Regardless of the issues, getting the brakes, suspension and steering systems inspected and repaired is key to making the car safe to drive.

How this system works:

Brakes

Brakes are available as disc or drums, older vehicles tend to have drum brakes while new models incorporate disc brakes. Both systems use friction and resistance to bring the vehicle to a stop.

Disc brakes have a rotor that is connected to the wheel. Brake pads grind against the rotor, creating friction, which brings the car to a stop. Over time, brake pads and rotors will wear down and have to be replaced.

Drum brakes work on the same principal. A drum is attached to the wheel and when the brake pedal is depressed, brake shoes press against the drum, slowing the vehicle. Brake shoes, like pads will wear out over time.

Suspension

The job of the suspension system is to maximize the friction between the tires and the road, as well as provide stability to the steering system. There are a number of different suspension systems. The main components of the suspension system are struts, shock absorbers, springs and tires.

The springs help to support the weight of the vehicle, they also maintain ride height, and absorb bumps in the road.

The shocks reduce the up and down motion of the car that is produced when the vehicle hits bumps on the road or highway.

Struts replace the shocks and springs on some vehicles. They combine the shock and spring into a single unit.

Tires keep the vehicle in contact with the road and provide traction to make driving safe.

Steering System

The steering system takes the rotation of the steering wheel and converts into the swiveling motion of the wheels.

A rack and pinion system uses a gear set that is enclosed in a metal tube. Both ends of the rack protrude from the end of the tube. A tie rod connects to each end of the rack and the pinion gear is attached to a steering shaft. As the steering wheel is turned, the gear spins which moves the rack.

Common reasons for this to happen:

Brakes

  • Loss of Hydraulic Pressure: The brake system uses hydraulic pressure to push the brake pads against the rotors. If there is a leak in the hydraulic system the brakes will not provide the correct stopping power.

  • Worn Brake Pads: Brake: Brake pads will wear out over time. The have a indictor that will make contact with the rotor and produce a squealing noise when they get too thin. If the brakes are squealing the pads should be replaced. If the squealing turns into a grinding noise, the pads have worn through completely, this can damage the rotors which is a much more expensive repair.

  • Stuck Caliper: The calipers push the brake pads against the rotors. If a caliper gets stuck the vehicle will pull to one side. A failing brake hose can cause this issue.

  • Warped Rotors: If the rotors are exposed to stress, such as towing or mountain driving, they can warp. Warped rotors will cause the vehicle to vibrate and shake while braking.

  • Worn Brake Shoes: This is basically the drum brake version of worn brake pads for disc brakes. The shoes will squeal when they are too thin and need to be replaced. A grinding noise indicates shoes that have been worn through completely.

Suspension

  • Worn Shocks or Struts: In most vehicles the struts will eventually wear out and need to be replaced. If you notice excessive bouncing when going over bumps, or the vehicle nosedives when braking, it may be time to replace the shocks or struts.

  • Uneven Tire Wear: A failing suspension system can lead to uneven tire wear as the system is not holding the wheels even on the road at the proper angle. Look for bald spots on your tires. Suspension problems should be inspected and repaired as soon as possible.

  • Bad Spring Coils: In most cases, spring coils will last the life of the car but they can break. If the vehicle is not driving smoothly or leaning heavily to one side, it could be an issue with the spring coils. This should be fixed immediately.

  • Leaking Shocks: Shocks will often have to be replaced over the life of a car. If there is oil leaking on the garage floor or a leak is visible from the shocks, it is time to get them replaced.

Steering

  • Bad Tie Rods: Tie rods are the component that connects the steering linkage to the wheels of a vehicle. Eventually tie rods will wear out. As they do the vehicle will go out of alignment and wear the tires faster. There may also be a squeaky sound and the steering wheel may be harder to turn.

  • Loose Lug Nuts: Something as simple as a loose lug nut will cause the steering wheel to shake. This is a fairly easy problem to fix.

  • Unbalanced Wheels: This problem can also cause the steering wheel to shake at certain speeds. At higher speeds this can become dangerous. The tires should balanced as soon as possible.

  • Steering Gearbox Not Responding or Hard to Steer: if the steering wheel does not seem to be responding properly or it is hard to steer this can indicate a problem with the steering gearbox. This issue can quickly become dangerous. The steering system should be inspected and repaired as soon as possible.

  • Power Steering Malfunction: The power steering component can malfunction for a number of reasons. Fluid may be leaking due to damaged seals on the power steering pump, or there could be a leak in one of the power steering hoses. A whirring or siren-like sound coming from the steering pump can be an indicator of this problem.

  • Power Steering Pump: A failing power steering pump can make the steering wheel hard to turn and it may make a groaning noise when the wheel is turned. A failing pump will eventually die and need to be replaced.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the brake, suspension or steering issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All three of these systems are vital to the safety of the vehicle. While some issues with these systems will be more of an inconvenience than a safety issue, other problems can lead to dangerous driving conditions and the problem should be addressed as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(70)

Rating Summary
62
5
0
1
2
62
5
0
1
2

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Brakes, Steering and Suspension Inspection - Long Beach, California
Straight and to the point. All the info I needed from him after the checkup

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Mercedes-Benz E320 V6-3.2L - Brakes, Steering and Suspension Inspection - Oakland, California
This is our second service with Tien. He's been terrific to work with! He's fast, friendly, and recommends only services that truly need attention so as to help keep costs low. This appointment was for an inspection of the brakes and suspension, and I've just booked the follow-up appointment for him to come back next week to complete the necessary repairs. I also love that the cost for the inspection appointment is applied 100% toward the follow-up appointment. Go with Tien, he can't be beat!

Estevan

12 years of experience
41 reviews
Estevan
12 years of experience
Mercedes-Benz GL450 V8-4.6L - Brakes, Steering and Suspension Inspection - Temecula, California
Very professional and knowledgeable about the car.

Angel

5 years of experience
125 reviews
Angel
5 years of experience
Mercedes-Benz S550 V8-5.5L - Brakes, Steering and Suspension Inspection - Bowie, Maryland
I have over 40 years of automotive management experience. Angels work ethic and in-depth knowledge of how to diagnose mechanical issues is outstanding. Angel is the mechanic that you an trust for a honest evaluation of your mechanical problems. This young man has the potential to surpass Goss Garage on any social media platform .

Excellent Rating

(70)

Rating Summary
62
5
0
1
2
62
5
0
1
2
Number of Mercedes-Benz Brakes, Steering and Suspension Inspection services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0475 OBD-II Trouble Code: Exhaust Pressure Control Valve Malfunction
What What the P0475 code means The P0475 means that there is something wrong with your exhaust back pressure valve. What causes the P0475 code? There may be more than one cause for the P0475 code. One is a faulty...
How to Safely Drive When There’s Black Ice
Black ice is a thin layer of slick ice on a road. Staying away is the best way to drive safely on black ice, but if you hit it, avoid sudden braking.
The Worst Cities to Break Down In
Here's where you'll find the highest car repair costs, worst public transportation, and congestion.

Odd fuel trim pattern cycle causing rough running

Hello and thank you for contacting Your Mechanic. What seems to happening with your engine Bank 1 is going rich and Bank 2 is going lean and repeating itself. Now, for this to repeat itself, there is probably a problem...

Fixed timing belt and harmonic balancer, now car will not start? 1996 Mitsubishi 3000GT

Hello - there are several possibilities here for this "no-start" problem (https://www.yourmechanic.com/article/how-to-troubleshoot-a-car-that-is-hard-to-start-by-jessica-howe), but they will have different symptoms. If you are getting no spark at the plugs, that could indicate a failed or incorrectly-installed crankshaft position sensor. If you get...

How much should it cost for the dealer to clean the throttle body, and MAP sensor, and replace the PCV valve cover on my jetta?

Hi There, Unfortunately, there is not a uniform pricing system when it comes to what various dealers charge. Many things come into play (availability of parts, wholesale pricing, access to labor, overhead, etc.) for various repair shops when it comes...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com