Mercedes-Benz EQS 580 Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,334)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,334)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Mercedes-Benz EQS 580 Car shuts off when stepping on gas pedal Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Mercedes-Benz EQS 580ElectricService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
* Mercedes-Benz EQS 580ElectricService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$119.68 - $130.70
* Mercedes-Benz EQS 580ElectricService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$119.75 - $130.82
* Mercedes-Benz EQS 580ElectricService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
Show example Mercedes-Benz EQS 580 Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6,334)

Rating Summary
5,908
202
59
31
134
5,908
202
59
31
134

Chris

16 years of experience
112 reviews
Chris
16 years of experience
Mercedes-Benz ML500 V8-5.0L - Car shuts off when stepping on gas pedal - Zephyrhills, Florida
Chris is great! He knows what he’s doing.

Mike

21 years of experience
110 reviews
Mike
21 years of experience
Mercedes-Benz GLA250 L4-2.0L Turbo - 50,000 Miles Maintenance Service - Riverdale, Georgia
Mike was very professional and explained everything to my understanding. I was very pleased with the job he did so much so I’d like to schedule my next service with him personally.

Clifton

31 years of experience
289 reviews
Clifton
31 years of experience
Mercedes-Benz E550 V8-5.5L - Alternator - Lake Worth, Florida
Very good

Christian

11 years of experience
36 reviews
Christian
11 years of experience
Mercedes-Benz E350 V6-3.5L - 50 Point Inspection - Pompano Beach, Florida
Very professional and knowledgeable of his job. Would love to continue to use Christian in the future. Great experience.

Excellent Rating

(6,334)

Rating Summary
5,908
202
59
31
134
5,908
202
59
31
134
Number of Mercedes-Benz services completed
69674+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Muffler
Common signs include engine misfires, a very loud exhaust noise, and condensation from the exhaust pipes.
How to Register a Car in North Dakota
There There are so many different factors that will have to be considered when moving to a new state. Making a move to North Dakota can be quite beneficial for a number of different reasons. Just like any other state,...
P0713 OBD-II Trouble Code: Transmission Fluid Temperature Sensor Circuit High Input
P0713 means the automatic transmission fluid is too hot due to low or dirty transmission fluid, slipping or damaged transmission or damaged wiring.

1997 GMC Safari SLX 4.3L I Just install a coolant temp sending unit. now my motor wont start. but dose when unplug. what could be

The coolant temperature sensor sends a signal to the ECM to enrich the mixture when the engine is cold (cold engines need more fuel at initial start up), otherwise you will have hard starting or perhaps no starting. Something is...

Turn signal stopped returning

Audi 2015 , getting a message saying alternator at fault, battery not charging.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com