Mercedes-Benz E450 Parking brake won't engage Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,558)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,558)

Parking brake won't engage Inspection Service

How much does a Parking brake won't engage Inspection cost?

On average, the cost for a Mercedes-Benz E450 Parking brake won't engage Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz E450V6-3.0L TurboService typeParking brake won't engage InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Mercedes-Benz E450V6-3.0L TurboService typeParking brake won't engage InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Mercedes-Benz E450L6-3.0L Turbo HybridService typeParking brake won't engage InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz E450 Parking brake won't engage Inspection prices

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117

Chris

15 years of experience
112 reviews
Chris
15 years of experience
Mercedes-Benz R350 V6-3.5L - Air Suspension Air Compressor - Zephyrhills, Florida
Very knowledgeable, skilled, personable. Will use him every time we need a service with our car.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mercedes-Benz E320 V6-3.2L - Exhaust Gas Recirculation/EGR Valve - Peoria, Arizona
Professional and thorough as always!

Herman

13 years of experience
86 reviews
Herman
13 years of experience
Mercedes-Benz GLK350 V6-3.5L - Car is not starting - Miami, Florida
Herman diagnosed the problem quickly.... thank you.

Chuck

10 years of experience
351 reviews
Chuck
10 years of experience
Mercedes-Benz E350 V6-3.5L - Oil Change - Dallas, Texas
Chuck was very professional and on point. Friendly,knowledgeable and Timely, courteous..

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117
Number of Mercedes-Benz services completed
61138+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Pinion Seal Last?
Front-wheel Front-wheel drive cars have CV axles that transmit power from the transmission to the wheels. However, in a rear-wheel drive system, a drive shaft connects to the transmission and transmits power to the rear differential. The driveshaft connects to...
P0141 OBD-II Trouble Code: O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2)
P0141 code definition O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2) What the P0141 code means P0141 is the OBD-II generic...
The Guide to Legal Car Modifications in Idaho
ARENA Creative / Shutterstock.com Whether you live in the state or are planning to move there, Idaho has regulations that cover vehicle modifications that you must follow to ensure that your vehicle is considered street legal when...

Slow coolant loss

Put a clean sheet of paper or cardboard under the car when you park it at the end of your day and check it the next morning for spots. You may or may not see something helpful. If not, sometimes...

Reverse gear wont work but other gears work.

Hello, thank you for writing in. Losing reverse can happen for a wide number of reasons. To simplify things, start with a full inspection. This will include checking the level and condition of the transmission fluid. If it is low...

My car has had some issues lately. Ive been watching a lot of youtube. Found 1 video of 5 ways to spot misfires. Im 5 for 5. But, somehow I don't think that is my only problem.. after watching multiple videos of guys working on misfiring [engines](/topics-engine-ford/), those cars sound and run great compared to mine lol. So this morning after driving to 2 different schools to pick up work for the kids, after the 2nd school stop, my car would not start. It would try, but then stall. I gave it gas, and as long as i was giving it gas, it sounded like my old dirt bike warming up, but would run until i took my foot off the gas. I got it home out of shear determination. It capped out at about 40 mph. It stalled at a stop sign. I came up on a red light and threw it in neutral which seemed to barely keep it alive. I changed the [spark plugs](/topics-spark-plug-ford/) not long ago but i haven't taken them out just yet to inspect. I have a little 1min video of part of my drive home. Im sick of bring it to a mechanic to spend 2k at a time just to still have issues

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com