Mercedes-Benz E300 Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mercedes-Benz E300 Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercedes-Benz E300L6-3.0L Turbo DieselService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1998 Mercedes-Benz E300L6-3.0L Turbo DieselService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Mercedes-Benz E300V6-3.5LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 Mercedes-Benz E300L4-2.0L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Mercedes-Benz E300V6-3.5LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2009 Mercedes-Benz E300V6-3.0LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1996 Mercedes-Benz E300L6-3.0L DieselService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2008 Mercedes-Benz E300V6-3.0LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz E300 Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Adam

17 years of experience
230 reviews
Adam
17 years of experience
Mercedes-Benz E300 L4-2.0L Turbo - Oil Change - Pompano Beach, Florida
Excellent Job. 5 Stars.

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Mercedes-Benz E300 L6-3.0L Turbo Diesel - Oil Change - Everett, Washington
Super friendly and knowledgeable.

Eduardo

19 years of experience
550 reviews
Eduardo
19 years of experience
Mercedes-Benz E300 L4-2.0L Turbo - Oil Change - Houston, Texas
He was very courteas and professional. Responded in timely manner . I will recommend him.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Mercedes-Benz E300 L4-2.0L Turbo - Oil Change - Houston, Texas
Joseph was on time and knowledgeable . Defiantly will recommend

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Mercedes-Benz E300 services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Do Some Cars Have Really Smelly Exhaust Fumes?
Smelly car exhaust fumes mean that something is going wrong. It could be leaking fluids, a failing catalytic converter, or imbalanced air/fuel mix.
How to Use GhosTrack as a Vehicle Tracking Application
The The GhosTrack application (https://play.google.com/store/apps/details?id=soalib.android.location&hl=en) allows you to track a variety of important things in your life, including your children and your vehicle. The app can help prevent theft (https://www.yourmechanic.com/article/how-to-keep-your-vehicle-safe-from-theft) by allowing you to use two mobile devices to track...
How to Replace a Combination Switch Assembly
Combination switches include the control of turn signals, windshield wipers, windshield washers, and high beams. Faulty switches can cause accidents.

My car runs hot but it never overtheats the temperature gauge moves up and down

When you are driving on the highway above 45 mph your engine cooling fan does not provide any flow and the car relies on the force of moving air from the speed. The fan can still come on if needed...

Security light on, new key fob cannot be programed

Hello. Your key fob needs to be programmed to your car for it to work. There are a couple of ways this can be done. You could take the key fobs back to the dealership and have them program them...

where is crankshaft position sensor located on 2011 vw cc r-line

The crankshaft position sensor is typically mounted to the right of the oil filter on this engine model. Usually, the oil filter has to be removed to gain access. The camshaft position sensor should only be changed if it fails...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com