Mercedes-Benz CLS500 Heating AC Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(40)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(40)

Heating AC Inspection Service

How much does a Heating AC Inspection cost?

On average, the cost for a Mercedes-Benz CLS500 Heating AC Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS500V8-5.0LService typeHeating AC InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz CLS500 Heating AC Inspection prices

We rarely give any thought to the heating and air conditioning systems in our cars until they stop working. These systems help keep the cabin of the vehicle warm in winter and cool in summer. Maintaining the heating and air conditioning system is key to a comfortable ride, regardless of the season.

While the major function of these systems is for the comfort of the passengers, they are also integral to the defroster system, which keeps the windshield clear and ensures good visibility on a cold or snowy day. Driving with reduced visibility can greatly increase the odds of an accident.

How this system works:

Heating System

The heating system in a car consists of a number of components. The heater core, heater hoses, heater control valve, blower fan/motor, and the control panel in the cabin are the key parts of the system. The heater core is a like a small radiator mounted under the dash. It has an inlet and outlet to allow the flow of coolant through the core, the heater control valve regulates the amount of hot engine coolant that goes through the heater core. Finally, the heat generated by the heater core is blown into the cabin by the blower motor, which is controlled by the control panel in the cabin.

Air Conditioning

The air conditioning system uses a compressor, condenser, evaporator and an expansion valve. Refrigerant (R-134a or HFC-134a), is compressed in the compressor system which transforms it into a hot gas. The hot gas is then cooled to a liquid state in the condenser and sent to the expansion valve. When the gas is forced through the expansion valve, it returns to a gas state, which is rapidly cooled in the evaporator. The blower fan blows over the evaporator and sends the cold air into the cabin via the vents. This system is controlled by the control panel in the cabin.

Common reasons for this to happen:

Heating

  • Low Coolant Levels: The hot air that comes into the vehicle is a byproduct of the heat of the coolant in the engine. If the coolant levels are low or the fluid is contaminated, it can lead to a poorly functioning heating system. In most cases a leak is to blame.

  • Blown Fuse: While a blown fuse can be a quick fix when it comes to the heating system, in most cases it is just a symptom of a larger problem. If the same fuse continues to blow on regular basis the vehicles heating system should be inspected for a bigger issue.

  • Bad Heater Core: The heater core is basically a mini radiator located behind the dashboard. There are a number of things that can cause a heating core to malfunction, it may be clogged due to contaminants in the anti-freeze. Hoses can crack, leak or become loose. The control valve can also get stuck. A bad heater core will result in zero heat.

  • Air Pockets in the Heater Core or Hoses: If there is air in the cooling system in most cases there will also be a leak. Air in the system can create air pockets that will interrupt the flow of coolant through the heater core. The air can be bled from the system to resolve this issue.

  • Malfunctioning Thermostat: The thermostat functions as a shut-off valve between the radiator and the engine. The thermostat is closed as the car warms up. When the engine is warm, the thermostat opens to circulate the anti-freeze. A malfunctioning thermostat will often stick open, resulting in an engine that doesn’t warm up so the heating system doesn’t have enough hot air to warm the cabin.

  • Bad Blower: The electric blower motor pushes the hot air out into the cabin and if it is malfunctioning the heat will not make it into the vehicle cabin. A bad blower can be caused by a blown fuse, a blower speed controller that is not working properly or the motor itself may be shot.

Air Conditioning

  • Loss of Refrigerant: If the air is no longer coming out cold, this could indicate that the refrigerant needs to be recharged or there is a leak in the system. Refrigerant problems are one of the most common reasons an air conditioning system isn’t working properly. The system will need to be recharged from time to time with new refrigerant, as it loses roughly 15 percent every year. A leak can also cause this problem as the system loses refrigerant at the leak site.

  • Bad Compressor: The compressor works very hard and they run hot due to the internal pressure they must produce. All of this hard work means that a failing compressor is a very common problem with a vehicles air conditioning system. A loud knocking or squealing noise will often point to compressor problems, as will a lack of cold air or the air conditioning just not working at all. This should be repaired immediately as it can affect other parts and run up the cost of the repair.

  • Leaking Hoses: The air conditioning system relies on a variety of hoses and if they are loose or leaking you could experience a loss of cooling due to leaking refrigerant. Leaking hoses should be replaced as soon as possible.

  • Failing Condenser: If the air conditioning system is not cooling or just stops working, it could be a condenser problem. In most cases there are two common causes of condenser failure. One is a leak, a condenser has a number of tubes and seals, which can leak, due to normal wear and tear. Unfortunately, these cannot be replaced or repaired so the condenser will have to be replaced. A blockage is the second most common cause of condenser failure. Metallic debris, often from a failing compressor is usually the cause. If this is the case, both the condenser and compressor will have to be replaced.

  • Failing Condenser Fan: The condenser fan removes the heat generated by the condenser and if it is failing the air conditioning system will not be able to cool. A lack of cooling or a completely non-functioning air conditioning system are common symptoms of this problem. In most cases the fan will have to be replaced.

  • Faulty Low Pressure Cutout Switch: The low pressure cutout switch prevents the compressor clutch from engaging if the pressure in the system is low, this prevents the compressor from being damaged due to a lack of lubrication. If this is the problem, the air conditioning system will not work at all.

  • Faulty Blower Motor or Resistor: The blower motor circulates the cold air into the cabin of the car. If the air conditioning system makes noise when you turn it on but no air comes through the vents or if the blower is only operating at full speed the blower motor or resistor could be defective. It is also possible that the fuses that service it are blown.

  • Faulty Switches: If the air conditioning only works intermittently or you have to jiggle the switches to get it to function there could be a problem with the control panel.

  • Damaged Receiver/Dryer: If the air conditioner is not blowing out cold air and moisture is accumulating on the windows, there is a good chance the receiver needs to be replaced. This issue should be fixed quickly as the excess moisture could easily damage other air conditioning parts.

  • Blown Fuse: In some cases, the simplest explanation is the correct one. There are a number of fuses connected to the air conditioning system and if one of them is blown it can shut down the entire system.

What to expect:

A top­-rated mobile mechanic will come to your home or office to determine the source and cause of the heating or air conditioning issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

While driving around without a proper functioning heating and air conditioning system will certainly be uncomfortable, it is usually not a life or death situation. However, if the defroster is no longer working, this can result in reduced visibility, which can lead to dangerous driving conditions. In most cases, a malfunctioning heating and air conditioning system should be repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(40)

Rating Summary
35
3
0
1
1
35
3
0
1
1

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mercedes-Benz CLS500 V8-5.0L - Battery - Surprise, Arizona
Efficient and professional.

Andrew

11 years of experience
338 reviews
Andrew
11 years of experience
Mercedes-Benz CLS500 V8-5.0L - Check Engine Light is on Inspection - Gwynn Oak, Maryland
Great customer service.

James

30 years of experience
883 reviews
James
30 years of experience
Mercedes-Benz CLS500 V8-5.0L - Windshield Washer Tubes - Debary, Florida
Timely and knowledgeable. Did a complete job and offered credit for parts that did not fit my car.

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Mercedes-Benz CLS500 V8-5.0L - Alternator - Los Angeles, California
Ricardo is a very excellent mechanic. He does all he can to correct the problem. His friendly demeanor makes you feel very comfortable he will do his best!

Excellent Rating

(40)

Rating Summary
35
3
0
1
1
35
3
0
1
1
Number of Mercedes-Benz CLS500 services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an Air Bleed Housing Assembly Last?
The The air bleed housing assembly is located near the rear of your car’s engine. It is part of the cooling system, and consists of a small housing that has an attached bleeder valve. It only comes into play after...
P0349 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Intermittent (Bank 2)
P0349 P0349 code definition Your vehicle’s PCM has found an improper wave form or voltage reading from the camshaft circuit A in engine bank 2. What the P0349 code means The camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) works with the notches, or...
B1937 OBD-II Trouble Code: Air Bag Passenger Pressure Switch Circuit
B1937 means there is an issue with the airbag pressure switch on the passenger side, probably due to a malfunctioning electrical component.

What does the Service Engine Soon Light mean?

The meaning of the "Service Engine Soon" Light is dependent on the make and model of your car and the manufacturer’s specifications. There are numerous dashboard indicator lights, and the particular indicator lights that are included on a dashboard are...

Crank seal leaking

Hello! I suggest getting a second opinion of the source of the leak, because a crank seal will not leak a fluid other than oil. The leak may be from a transmission seal, which is located almost "face to face"...

Sometimes when I shift my car's automatic transmission into Drive it stays in neutral. Reverse works and trans fluid is full.

It is very possible that you could have some internal transmission damage. I would recommend enlisting in the assistance of a qualified transmission professional to inspect your transmission for internal faults. I must warn that this could be a pricy...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com