Mercedes-Benz CLS400 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz CLS400 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz CLS400V6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2016 Mercedes-Benz CLS400V6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2017 Mercedes-Benz CLS400V6-3.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz CLS400 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
5
0
0
0
1
5
0
0
0
1

Tinashe

13 years of experience
644 reviews
Tinashe
13 years of experience
Mercedes-Benz CLS400 V6-3.0L Turbo - Oil Change - Marietta, Georgia
Delivers every time! I can always count on this guy.

Mack

22 years of experience
114 reviews
Mack
22 years of experience
Mercedes-Benz CLS400 V6-3.0L Turbo - Oil Change - Burleson, Texas
Gre,at

David

13 years of experience
424 reviews
David
13 years of experience
Mercedes-Benz CLS400 V6-3.0L Turbo - Oil Change - Marietta, Georgia
Always deliver!!!! Awesome experience!

David

13 years of experience
424 reviews
David
13 years of experience
Mercedes-Benz CLS400 V6-3.0L Turbo - Brake Pads Replacement (Front) - Marietta, Georgia
David continues to DELIVER!!!!

Excellent Rating

(6)

Rating Summary
5
0
0
0
1
5
0
0
0
1
Number of Mercedes-Benz CLS400 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Do Wiring Harnesses Last?
Car wiring harnesses connect all the different electrical systems and components in a vehicle. Wiring harnesses can last the lifetime of the vehicle.
Can You Switch Between Regular and Synthetic Motor Oil?
If you have ever wondered if you can switch between regular and synthetic motor oil, you need to consider what type of oil works best for your engine.
How Do You Know If the Oil Pressure Gauge Is Bad?
The oil pressure in a vehicle engine plays an important role in making sure that lubricants reach the areas they need to,...

How do I customize the Remote Lock feedback?

When the remote keyless entry (RKE) transmitter is used to lock the vehicle, the vehicle can confirm the locking by flashing the lights and beeping the horn. You can choose which feedback you receive when locking the car via the...

My car rpm fluctuates slightly, during warm up and my temperature gauge also fluctuates intermittently.

Hi, thanks for writing in. My first impression when you described the vibration is that you may have a bad motor mount. When you put the car in Drive or Reverse, the engine shifts slightly. If the rubber in the...

2004 acura mdx timing belt service: what components do you recommend replacing

Hello, thank you for writing in. When changing the timing belt, it is often recommended to change the water pump, chain tensioner, and the gaskets involved with accessing the timing chain. The price is vary greatly depending on what kind...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com